Fernco Inc. 1056-62 Flexible Coupling Trap 6 in x 2 in
Flexible elastomeric PVC coupling joins 6 in pipe to 2 in pipe, rated to 4.3 psi and 140 °F with 300 stainless steel bands
- Product typeDrain Components
- Main materialElastomeric Polyvinyl Chloride
- Flexible 6 in x 2 in connection fits drain pipes
- Elastomeric PVC resists chemicals, fungus and sewer gases
- 300 stainless steel bands secure the joint under pressure
- Withstands up to 140 °F for hot-water discharge
- Meets ASTM C1173 standard for reliable installations
Drain coupling for 6 in by 2 in pipe
The Fernco 1056-62 flexible coupling joins a six-inch pipe to a two-inch pipe in drainage systems. Its elastomeric polyvinyl chloride body resists chemicals, fungus growth and normal sewer gases. Stainless steel 300 bands secure the connection. The fitting meets ASTM C1173 standard.
Pressure and temperature limits in service
The coupling withstands up to 4.3 psi during normal use. Maximum operating temperature is 140 degrees Fahrenheit. Material resists ultraviolet rays for outdoor installations. No noise or power specifications apply to this passive component.
Fits between dissimilar pipe sizes
Inside diameters measure 6-39/64 inches by 2-25/64 inches with a six-inch fitting length. The flexible body accommodates slight misalignment without rigid adapters. Builders needing a straight same-size joint or a different material transition should select another fitting.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $33.99
- Typical for this category: the median of 4,240 items is $31.99.
Specifications
| Product | |
|---|---|
| Brand name | Fernco |
| Model name | 1056-62 |
| Product type | Drain Components |
| Size & build | |
| Main material | Elastomeric Polyvinyl Chloride |
Questions about this item
How do I install the 1056-62 coupling and what step do people get wrong?
Slide the elastomeric PVC body over the 6-inch and 2-inch pipe ends, then tighten the 300 stainless steel bands evenly; the step often missed is checking that both pipes are fully seated against the centre stop before final tightening.
What maintenance or replacement will the 1056-62 coupling need later?
Inspect the 300 stainless steel bands and elastomeric PVC body periodically for cracks, corrosion or loss of seal; replace the coupling if the material hardens, splits or no longer holds the 4.3 psi rating.
What limit shows up first on the 1056-62 coupling under sustained use?
The 140-degree Fahrenheit temperature ceiling and 4.3 psi pressure limit are the first constraints; exceeding either can degrade the elastomeric PVC and compromise the seal.
More in Drain Stoppers, Strainers & Traps
Similar items
Viega
Viega 79040 3/4" Press Bronze Spring Check Valve .5 psi 200 psi 200°F
- Drain Components
- HAWA
$33.99
0.00041188BTC
In stock
