Fernco Inc. FPW248CS 2 in x 48 in repair wrap trap
Resin-fiberglass wrap repairs 1/8 in to 1 in pipes in 30 minutes, withstanding 425 °F and 26,600 psi compression
- Product typeDrain Components
- Product colorGray
- Sold asCard
- Repairs pipes up to 1 in diameter with 2 in x 48 in wrap
- Cures fully in 30 min for quick return to service
- EPA approved resin fiberglass works on concrete copper plastic PVC rubber galvanized
- Withstands 425 °F operating temperature for hot water lines
- Delivers 26 600 psi compression and 16 100 psi flexural strength
Pipe Repair Wrap Kit
The Fernco FPW248CS is a resin-fiberglass wrap designed to seal leaks on pipes from 1/8 in to 1 in diameter. It suits plumbers and maintenance teams needing a fast, permanent fix on copper, PVC, galvanised, concrete or rubber lines without replacing sections. The gray wrap activates with water and conforms to irregular surfaces for a tight bond.
Thermals Noise And Power
This repair wrap requires no electricity, moving parts or external heat source, so it produces zero noise and draws no power during application or service. The resin system reaches full cure in 30 minutes at ambient temperature and afterwards withstands continuous operating temperatures up to 425 degrees F without degradation. No thermal management or ventilation is needed.
Compression Strength 26 600 Psi
The cured laminate delivers a compression strength of 26 600 psi and a flexural strength of 16 100 psi, the key figures that determine whether the patch will hold pressure on the intended line. The 2 in by 48 in roll provides enough material for multiple wraps on the maximum 1 in pipe. It carries EPA approval for potable water contact. Not for pipes larger than 1 in or for structural loads beyond the rated strengths.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 78% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Fernco |
| Model name | FPW248CS |
| Product type | Drain Components |
| Product color | Gray |
| Size & build | |
| Shipping weight | 0.10 kg |
| Package size | 146 × 86 × 38 mm |
Questions about this item
How do I install the FPW248CS repair wrap on a leaking pipe?
Clean the pipe surface, activate the resin in water, wrap tightly around the pipe, and maintain pressure for the full 30 min cure — skipping the overlap or releasing early weakens the bond.
What maintenance or replacement will the FPW248CS repair wrap need after installation?
Once fully cured, the resin fiberglass wrap forms a permanent repair rated to 26,600 psi compression and 16,100 psi flexural strength — no scheduled maintenance or replacement is required.
What is the first limit the FPW248CS repair wrap hits under sustained high-temperature use?
The maximum operating temperature is 425 Degrees F; exceeding this limit degrades the resin fiberglass material before the pressure ratings of 26,600 psi compression or 16,100 psi flexural are reached.
More in Drain Stoppers, Strainers & Traps
Similar items
As Seen On TV
As Seen On TV DJAP0006 Pipe Blaster 30 psi drain trap
- ABS Plastic
- Green
$12.99
0.00015711BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.0001692BTC
In stock