Fervit 19/20Pin Header to USB 3.0 Dual Port Female Screw Mount Cable 30cm 90 Degree 5Gbps
Converts a motherboard 19/20-pin header into two screw-mount USB 3.0 ports with a 30 cm 90-degree cable for tight spaces
- Converts a 19/20-pin header to dual USB 3.0 ports
- Screw-mount sockets secure the cable to your chassis
- 90-degree angled plug fits tight front-panel spaces
- 30 cm length reaches internal headers without excess slack
- 5 Gbps bandwidth supports simultaneous two-way data transfer
Internal USB 3.0 header adapter
This Fervit cable converts a motherboard 19/20-pin header into two USB 3.0 Type-A ports. The 30 cm length and 90-degree down-angled connector suit front-panel or tight-chassis installations. It supports 5 Gbps transfer rates and simultaneous two-way data flow.
Builders adding front USB 3.0 ports
Ideal for PC builders who need to expose internal headers as external ports on a case front panel. The screw-mount flange secures the ports without a dedicated bracket. Not suited for users who require longer reach, angled-up orientation, or more than two ports from a single header.
Simple header installation
Plug the keyed 19/20-pin connector into the motherboard header and fasten the two screw holes to the chassis cut-out. The short, stiff cable limits routing flexibility; verify clearance behind the motherboard tray before ordering. Misaligned header pins are the most common cause of non-detection.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Does my motherboard need a free 19/20-pin internal header to use this cable?
Yes, the cable plugs directly into a motherboard 20-pin socket and converts it to two external USB 3.0 ports.
Can I keep my existing USB 2.0 front-panel ports while adding this cable?
The cable provides two USB 3.0 ports running at up to 5 Gbps and does not interfere with separate USB 2.0 headers on the same board.
How do I verify the cable is delivering 5 Gbps after installation?
Connect a USB 3.0 storage device and check that the operating system reports a SuperSpeed connection with transfer rates approaching 5 Gbps.
More in USB Cords & Extension Cables
Similar items
Jansicotek PQ003 USB4 cable 5 ft 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to Mini DisplayPort adapter 4K 2K 60Hz
- USB Type C
- USB Type C
STARTECH USB3SEXT6BK usb cable
- Connector on First…
- Data Transfer Cable





