Fervit Dual USB 3.0 A Female to Motherboard 20/19 Pin Adapter
Adds two USB 3.0 Type-A ports to a motherboard using a 20- or 19-pin internal header
- Adds two USB 3.0 Type-A ports via internal 20/19-pin header
- Flat PCBA design fits tight motherboard layouts
- Converts internal 20-pin USB 3.0 header to external ports
- Supports USB 3.0 speeds for connected peripherals
- Dual female connectors enable simultaneous device connections
Dual USB 3.0 internal adapter
This Fervit adapter adds two USB 3.0 Type-A ports to a desktop by plugging into a motherboard 20-pin or 19-pin internal header. It is aimed at builders who need front-panel or bracket-mounted USB 3.0 connections without using rear I/O slots. The flat PCB design keeps the assembly slim for tight chassis routing.
Flat PCB build and header fit
The board uses a flat-type PCBA that sits close to the motherboard surface, reducing clearance issues in compact cases. Dual female Type-A connectors accept standard USB 3.0 plugs directly, so external drives, docks or peripherals attach without extra cables. The 20-pin and 19-pin compatibility covers most common internal USB 3.0 header layouts.
Upgrades front-panel USB 2.0 headers
This adapter replaces a legacy USB 2.0 front-panel header when the motherboard provides a spare 20-pin or 19-pin USB 3.0 header. The jump is worthwhile for users moving large files to external SSDs or running high-bandwidth peripherals who need the 3.0 throughput. It does not add headers where none exist on the board.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
What USB standard does the 20/19-pin header support, and what speed does it cap at?
The adapter carries USB 3.0 signals from the 20-pin or 19-pin motherboard header to two Type-A ports, delivering up to 5 Gbps per port.
What clearance and bracket style does the flat PCBA need to fit a rear I/O slot?
The flat board assembly mounts in a standard full-height expansion slot; the dual Type-A ports protrude through the slot opening with no extra bracket hardware required.
How is the adapter installed, and which header orientation mistake is common?
Plug the 20-pin or 19-pin connector into the motherboard's internal USB 3.0 header, aligning the keyed notch; the frequent error is forcing the 19-pin plug onto a 20-pin header upside down, bending pins.
More in USB Cords & Extension Cables
Similar items
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 1.5 ft 240W 40 Gbps Thunderbolt 3
- USB C to USB C
- USB4
Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
Vszerda DC 5.5mm x 2.1mm Female to Micro USB Male Power Cord 15cm 2Pcs
- USB ,DC
- 15 cm





