Fervit USB 3.0 20Pin 19Pin Male to Female 90 Degree Up Mainboard Extension Cable
A 90-degree angled USB 3.0 extension cable connects a 20-pin or 19-pin motherboard header to a female port, supporting 5 Gbps speeds and two-way data transmission in tight spaces
- Super-speed up to 5Gbps, 10 times faster than USB 2.0
- 90-degree angled connector fits tight spaces around motherboard headers
- Male-to-female extension adds reach for 20-pin or 19-pin USB 3.0 ports
- Supports simultaneous two-way data transmission for full duplex operation
- Designed for USB 3.0 motherboard or host headers with 20-pin and 19-pin layouts
USB 3.0 Motherboard Extension Cable
This Fervit cable extends a 20-pin or 19-pin USB 3.0 header on a motherboard or host controller. It provides a female connector at a 90-degree upward angle for tighter internal routing. The link supports super-speed transfer up to 5 Gbps and simultaneous two-way data transmission.
Check Header Pin Count and Clearance
Verify that the motherboard or add-in card exposes a standard 20-pin or 19-pin USB 3.0 internal header before ordering. Ensure the upward-angled female end has enough vertical room above the header to seat fully without pressing against nearby components or the case wall.
Right-Angle Fit for Dense Builds
The 90-degree upward bend lets the cable run parallel to the board, freeing horizontal space around crowded headers near large coolers or long graphics cards. It connects directly to the existing header and accepts any standard USB 3.0 front-panel or internal device plug without adapters.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 77% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Does the cable include any extra adapters or mounting brackets, or is it just the 20-pin male to 19-pin female extension?
The product is the 90-degree angled extension cable itself with a 20-pin male connector on one end and a 19-pin female header on the other; no additional adapters or brackets are mentioned.
Should I pick the 20-pin or 19-pin side for my motherboard header?
The cable bridges the two: the 20-pin male plug goes into the motherboard's USB 3.0 header, while the 19-pin female socket accepts your front-panel or internal device connector.
Will I actually see 5 Gbps throughput inside a typical case?
The cable is rated for USB 3.0 super-speed up to 5 Gbps and supports simultaneous two-way data transfer; real-world speed depends on the connected devices and motherboard controller.
More in USB Cords & Extension Cables
Similar items
Vszerda USB C to USB C Cable 240W 6.6FT Black Nylon Braid
- USB Type C
- USB C to USB C
STARTECH UUSBHAUB3RA USB 2.0 A to Right Angle Micro B Cable 3 ft 91 cm
- USB A to Micro USB
- USB 2.0
Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
Vszerda Micro USB Female 4-Pin Bare Wire 11in 24AWG 4-Pack
- Micro USB
- Micro USB





