Fervit USB 3.1 to USB 3.0 20Pin Header Extension Cable 20cm
A 20 cm extension cable that links a USB 3.1 front-panel header to a USB 3.0 20-pin motherboard header for ASUS boards, supporting 3.1 and 3.0 devices but not 2.0 at 480 Mbps
- Connects USB 3.1 front-panel header to USB 3.0 20-pin motherboard header
- 20 cm length fits tight chassis routing without excess slack
- Supports USB 3.1 and USB 3.0 devices at full speed
- Does not operate at USB 2.0 480 Mbps
- Designed for ASUS motherboard USB 3.1 front-panel header layout
USB 3.1 front-panel header extension
This 20 cm cable connects a USB 3.1 front-panel header to a standard USB 3.0 20-pin motherboard header. It is designed for builders fitting a modern front-panel USB 3.1 port onto a board that only provides the older 20-pin connector. The link uses the USB 3.0 pin set with additional signals for backwards compatibility. It is a new Fervit accessory for internal case wiring.
Replaces a missing or too-short header cable
The extension bridges the physical gap when a chassis USB 3.1 header cannot reach the motherboard's USB 3.0 20-pin header. It is worth fitting when the front-panel cable falls short or when the case supplies a USB 3.1 header that the board lacks. The cable only operates with USB 3.1 or USB 3.0 devices; it cannot fall back to USB 2.0 at 480 Mbps. No official USB 3.1 header specification existed at the time of writing.
Suits ASUS motherboard builds
This cable suits system integrators and DIY builders who need to route a USB 3.1 front-panel connector to a USB 3.0 20-pin header on an ASUS board. It is not for users who only have USB 2.0 front-panel ports, because the adapter does not support the slower interface. Buyers needing a longer reach or a different motherboard header layout should look at other internal cable options.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $36.99
- Pricier than about 90% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
What motherboard header does the 20-pin connector plug into?
The 20-pin end connects to a standard USB 3.0 front-panel header on the motherboard.
Which way round does the cable go, and what is the common mistake?
Plug the USB 3.1 front-panel header side into the case port and the 20-pin side into the motherboard; reversing them gives no signal.
Will the cable need replacing if I move to a newer front-panel standard?
It only carries USB 3.1 and 3.0 signals, so a future header change would require a different cable.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U042-050 USB 2.0 Active Repeater Cable A/B M/M 50ft 480Mbps
- 50 ft (15.2 m)
- See Details
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to USB-B 2.0 cable 10 ft 2-pack black
- Male-to-Male
- USB
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda USB C 3.2 Gen2x2 20Gbps 240W PD3.1 E-Marker 2-pack 3m
- USB Type C
- USB Type C





