Fervit USB 3.1 Type-E Male to USB 3.0 Type-A Female 90° Adapter
Converts a motherboard USB 3.0 header to a USB 3.1 Type-E port with a 90° angled design for tight spaces and up to 10 Gbit/s
- Connect in tight spaces with 90° angled design
- Upgrade motherboard USB 3.0 header to USB 3.1 Type-E
- Achieve up to 10 Gbit/s data throughput
- Plug directly into any USB 3.0 header without extra parts
- Enable front-panel USB 3.1 port on cases lacking native header
Front-panel USB 3.1 Type-E adapter
This Fervit adapter converts a motherboard USB 3.0 header into a USB 3.1 Type-E female port. The 90 degree down-angled design fits tight spaces around the front-panel connector. It supports data rates up to 10 Gbit/s and requires no extra cables or power. The unit is supplied new and plugs directly into the existing header.
Builders adding a USB 3.1 front port
Suits PC builders whose case has a USB 3.1 Type-E front-panel connector but whose motherboard only offers a USB 3.0 header. The angled body clears nearby components in compact chassis. Not for systems that already provide a native Type-E header. Not for connecting external Type-A peripherals directly to the motherboard.
Header-to-Type-E conversion
The decisive specification is the conversion of a USB 3.0 header into a USB 3.1 Type-E female port. This single function determines whether the adapter matches the motherboard and case combination. No other specification governs compatibility.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
Will the 90-degree down angle clear the PCIe slot next to my motherboard's USB 3.0 header?
The right-angle design points the Type-E port downward, letting you plug a front-panel cable in tight clearance beside expansion cards or board components.
Do I need any screws or cables to install the adapter in the USB 3.0 header?
No. The adapter plugs straight into the 19-pin USB 3.0 header; no screws, brackets or extra cables are required.
Will the adapter itself need replacement if I later upgrade to a motherboard with native USB 3.1 headers?
The adapter is a passive converter; it only becomes unnecessary when the new board already provides a Type-E header.
More in USB Cords & Extension Cables
Similar items
Jansicotek PQ003 USB4 cable 5 ft 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to Mini DisplayPort adapter 4K 2K 60Hz
- USB Type C
- USB Type C
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable





