Fervit USB 3.1 Type-E to USB 3.0 20-pin adapter with CH334P chipset
Converts a motherboard USB 3.0 header to a USB 3.2 Gen 2 Type-E port with CH334P chipset splitting one USB 2.0 channel into two
- Converts USB 3.0 header to USB 3.2/3.1 Type-E for higher standard support
- Type-E port delivers up to 10Gbps data rates for fast SSD or HDD transfers
- CH334P chipset splits one USB 2.0 channel into two for dual device connection
- Compact design plugs directly into motherboard without extra accessories
- Reverses conversion from USB 3.1 header to USB 3.0 20-pin for broad compatibility
Purpose and audience
This adapter connects a motherboard USB 3.0 20-pin header to a front-panel USB 3.2 Gen 2 Type-E port. It suits builders adding a modern high-speed front connector to a board that only exposes the older header.
Deciding specification
The CH334P chipset splits one USB 2.0 signal channel into two, so two USB 2.0 devices can run simultaneously from the single Type-E port. The port delivers up to 10Gbps data throughput but carries no video, audio, Power Delivery or DisplayPort alternate mode signals.
Build integration
The compact module plugs straight into any USB 3.0 header without extra cables or brackets. It frees the newer Type-E front-panel port for fast SSD or HDD transfers while keeping legacy USB 2.0 peripherals functional on the same connection.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 84% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Fervit |
Questions about this item
What does the 10Gbps rating mean when I plug this into my motherboard?
The Type-E port can transfer data at up to 10Gbps with SSDs or HDDs, but actual speed depends on the drive and the USB 3.0 header you connect to.
Which header standard does the 20-pin side use and what does it limit?
The 20-pin female connector is a USB 3.0 header; it caps the link at USB 3.0 speeds even though the Type-E port is rated for 10Gbps.
Does this adapter need a separate bracket or cable to mount inside the case?
No, the compact board plugs directly into the motherboard USB 3.0 header without extra accessories.
More in USB Cords & Extension Cables
Similar items
STARTECH USB2C5C2M USB C to USB C cable 2m USB 2.0 480 Mbit/s 100W
- USB C to USB C
- USB 2.0
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda MA-84 DC 5.5mm x 2.1mm to Micro USB Cable 15cm 4-Pack
- Micro Usb ,Dc 5521
- 15 cm





