We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact SFP28 transceiver module with duplex LC ports and metallic housing

Ficer Technology Co., Ltd

Ficer Technology Co., Ltd 25G SFP28 CWDM 1270nm 10km SFP transceiver

SKU CH-HBY9-KVTAV

25 Gbps CWDM transceiver at 1270 nm reaches 10 km over single-mode fibre with 1.4 W maximum draw

  • Port count25GBASE-LR Ethernet
  • Product typeTransceiver
  • Optical wavelength1270 nm
  • Fiber modeSingle-mode Optical Fiber
  • Transfer speed25 Gbit/s
  • 25 Gbps throughput for high-speed 25GBASE-LR links
  • 10 km reach over single-mode fiber at 1270 nm wavelength
  • Built-in CDR on both transmitter and receiver for signal integrity
  • 4 W maximum power draw from a single 3.3 V supply
  • SFF-8402 SFP28 MSA and SFF-8472 compliant with duplex LC connector

25G SFP28 CWDM transceiver for 10km links

This 25G SFP28 CWDM transceiver operates at 1270nm over single-mode fiber for distances up to 10km. It is built for network engineers deploying 25GBASE-LR Ethernet or CPRI option 10 links in carrier and enterprise environments. The module uses a duplex LC connector and follows the SFF-8402 MSA form factor for hot-pluggable installation.

Sustained 25G throughput with on-board CDR

The transceiver maintains a 25.78 Gbps line rate with built-in CDR on both transmitter and receiver paths, keeping signal integrity stable over the full 10km reach. It supports 25GBASE-LR at 25.78G and CPRI option 10 at 24.33G without rate degradation during continuous operation. An uncooled CWDM DFB laser provides the optical source for consistent long-haul performance.

Low power draw and broad switch compatibility

Maximum power consumption is 1.4W from a single 3.3V supply, limiting thermal load in dense chassis. The module complies with SFF-8472 diagnostics for real-time monitoring of temperature, voltage and optical levels. It is coded for wide compatibility with Cisco, Juniper and other open switches, and meets RoHS and TAA requirements.

How it compares

Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.

Price $84.99
Cheaper than about 61% of the 1,471 comparable items (median $138.99).

Specifications

Product
Product typeTransceiver
Performance
Transfer speed25 Gbit/s
Connectivity
Optical wavelength1270 nm
Fiber modeSingle-mode Optical Fiber
Ports & slots
Port count25GBASE-LR Ethernet

Questions about this item

How much heat does the 1.4 W transceiver add when running 24/7?

The module draws a maximum of 1.4 W from a single 3.3 V supply, so it adds very little heat to a switch chassis even under continuous load.

What host equipment must I already own for this SFP28 module to function?

You need a switch or router with an SFP28 cage that accepts CWDM coding; the supplier will program the module for your specific brand and model before shipment.

Will this 1270 nm CWDM transceiver work alongside older 10 G SFP+ optics on the same switch?

Yes, the SFP28 form factor is backward-compatible with SFP+ cages, and the 25 Gbps link operates independently of any 10 G channels already in use.

More in SFP & SFP+ Transceiver Modules

Similar items