FloJet G575215Z Double Diaphragm Pump Trap
Air-operated double diaphragm pump moves fluid at up to 5 gpm with Santoprene diaphragms and check seats
- Product typeDrain Components
- Main materialHAWA
- Air-driven operation eliminates electrical hazards
- Santoprene diaphragms resist chemical attack
- 5 gpm maximum flow handles demanding transfer tasks
- 1/2 in barbed ports simplify hose connections
- Bottom discharge directs fluid away from pump body
Air-Operated Double Diaphragm Pump
The FloJet G575215Z is an air-operated double diaphragm pump constructed from polypropylene. It uses Santoprene diaphragms and check seats for chemical compatibility. The unit delivers a maximum flow rate of 5 gpm through 1/2 inch barbed media connections. A 1/4 inch barbed air intake powers the pump without electricity.
Fluid Transfer for Chemical and Industrial Use
This pump suits operators transferring compatible fluids in industrial, agricultural or marine settings where compressed air is available. The polypropylene body and Santoprene elastomers handle many acids, solvents and abrasive slurries. Buyers needing electric drive, higher flow rates or sanitary-grade certifications should look at alternative pump types.
5 gpm Maximum Flow Rate
The 5 gpm maximum flow rate determines whether this pump matches the required throughput for a given system. Combined with the 1/2 inch barbed ports, this figure decides if the unit can feed the downstream equipment without bottleneck. Verify the required flow against this limit before purchasing.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $154.99
- Pricier than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Flojet |
| Model name | G575215Z |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
How much liquid can the G575215Z move in a day of continuous use?
The pump delivers a maximum flow of 5 gallons per minute through its 1/2 inch barbed ports, so sustained output depends on air supply and system back-pressure.
What fittings must I already have to connect the G575215Z?
You need 1/2 inch barbed hose fittings for the inlet and outlet plus a 1/4 inch barbed fitting for the air supply line.
Will the Santoprene diaphragms and check seats handle the same chemicals as my older elastomer pump?
Santoprene offers broad chemical resistance; verify compatibility with your specific fluids against the manufacturer's chemical resistance guide.
More in Drain Stoppers, Strainers & Traps
Similar items
Rheem SP8260 Thermostat Trap 90-150°F 6E769 6E770
- Drain Components
- HAWA
Red Hat 8262R208 Brass Solenoid Valve 1/4 in 100-240V AC/DC Normally Closed
- Drain Components
Legris 3109 62 21 Push-Fit Elbow Fitting 1/2 in Tube 1/2 in Pipe PK10
- Drain Components
- HAWA





