Fluminer L1 Pro 6.0 GH/s Scrypt mining hardware

Scrypt ASIC for Dogecoin and Litecoin

The Fluminer FLUMINER-L1 Pro is a Scrypt algorithm ASIC miner rated at 6.0 GH/s with a tolerance of ±5%. It draws 1400W ±10% from a 110–240V AC supply and achieves a power efficiency of 0.23 J/MH at 25°C ambient temperature. The unit fits a 3U server form factor measuring 140mm by 300mm by 450mm and weighs 12.8 kg. It connects via RJ45 Ethernet at 10/100/1000M and WiFi, and operates between 0–40°C and 10–90% RH.

Upgrade from lower-hashrate Scrypt miners

Replacing a miner that delivers significantly less than 6 GH/s will raise daily coin output and reduce energy cost per megahash. The jump is worthwhile when electricity rates make the 0.23 J/MH efficiency a clear advantage over older hardware and when the 45 dB noise level meets the acoustic limits of the intended site. Dual or multi-mining across LTC, DOGE and BEL can further improve return on the same power budget.

Capacity headroom for continuous Scrypt loads

At 6 GH/s the device comfortably sustains round-the-clock mining of Dogecoin, Litecoin or Belcoin, either singly or in combined modes, while the integrated cooling keeps temperatures within the 0–40°C window. Headroom diminishes if ambient temperatures approach 40°C or if power input drifts toward the upper 10% tolerance, which can throttle hashrate or trigger thermal protection. Stable 110–240V supply and adequate rack airflow are essential to maintain rated performance.