Forest Grass USA TP4056 5V 1A Lithium Battery Charger Board TE585
A compact 27 mm × 17 mm module charges single-cell lithium batteries at up to 1000 mA from a 5 V micro-USB source and stops at 4.2 V with 2.5 V over-discharge and 3 A over-current protection
- SizeMedium
- Product colorBlack
- Charges single-cell lithium packs at up to 1000 mA from a 5 V micro USB supply
- Stops charging automatically at 4.2 V ±1 % to protect cell life
- Cuts power if voltage drops to 2.5 V preventing deep discharge damage
- Limits output current to 3 A for short-circuit and over-current safety
- Compact 27 mm × 17 mm board fits tight project enclosures
Charging board for single-cell lithium packs
The module accepts 5 V through a micro USB socket and manages charge termination at 4.2 V with a 1000 mA current limit. Over-discharge protection activates at 2.5 V and over-current protection at 3 A. The 27 mm by 17 mm board is intended for DIY projects that need a compact, standalone charger.
Micro USB input with 5 V supply
Power comes from any standard phone charger or USB port via the on-board micro USB connector; solder pads are also provided for a wired 5 V source. The fixed 1 A charge rate suits small-capacity cells and cannot be adjusted on this board.
Red and green LEDs show charge status
A red LED illuminates while charging and a green LED signals completion, giving immediate visual feedback without extra components. No battery, cables or documentation are included, so the builder must supply a compatible single-cell lithium pack and verify wiring before use.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 88% of the 5,998 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Product color | Black |
| Size & build | |
| Size | Medium |
Questions about this item
What does the 1000 mA maximum charging current mean for a lithium cell in practice?
It sets the top charge rate at 1 A, so a 1000 mAh cell would reach full in roughly one hour under ideal conditions.
What does the micro USB input cap in real use?
The micro USB port limits input to 5 V, so the board cannot draw more than the 1 A charge current regardless of the wall adapter used.
Will the 27 mm by 17 mm board fit inside a standard project enclosure?
At 27 mm long and 17 mm wide it fits most small enclosures; allow a few millimetres extra for the micro USB connector and wiring.
More in Tech Gadgets & Accessories
Similar items
Airwheel O0R8 Carabiner Compass Thermometer 2-Pack Black
- Small
- Compass, Thermomete…





