Fosmon HD8213 electrical timer switch 2-pack
A two-pack of in-wall countdown timers with nine pre-set intervals from five minutes to four hours for fans, heaters and lights
- Type of switchMOSFET
- Rated voltage12
- Amperage15
- Fit and compatibilityBathroom vent fans, Night/security lights, Heaters, Regular
- Pole configurationScrew
- Power rating1875 W
- Nine pre-set countdown options from 5 minutes to 4 hours
- Illuminated button and red LED indicator visible in darkness
- IP54 rated enclosure suits bathroom vent fans and heaters
- UL listed with ground wire for 15 A 1875 W loads
- Two switches and two wall plates included for multi-room install
2-Pack In-Wall Timer Switch
The Fosmon HD8213 two-pack provides programmable countdown control for bathroom vent fans, heaters and security lights. Each unit fits a standard single-gang wall box and requires a neutral wire for operation. The 15 A, 125 V rating supports loads up to 1875 W. ETL certification confirms compliance with North American safety standards.
Installation with Neutral Wire
Wiring uses screw terminals and the included mounting screws (0.748 in) secure the device to the wall box. One wall plate is supplied per timer, so multi-gang installations need additional plates. The neutral wire requirement means the switch cannot replace a two-wire loop without pulling a neutral conductor. MOSFET switching eliminates mechanical relay click.
Sustained Load Behaviour
The 15 A continuous rating handles bathroom fans and resistive heaters at full 1875 W without derating. IP54 enclosure protects the electronics from moisture during long steam cycles. Illuminated button and red LED programme indicator remain visible throughout extended runs. MOSFET output runs cooler than electromechanical alternatives under continuous duty.
How it compares
Measured against everything we stock in Timer Switches & Smart Plugs, at today’s prices. Recalculated every night.
- Price $29.99
- Pricier than about 60% of the 173 comparable items (median $25.99).
Specifications
| Product | |
|---|---|
| Brand name | Fosmon |
| Model name | HD8213 |
| Part number | HD8213 |
| Product type | Wall Mount, Screw |
| Color and finish | In Wall Neutral 2 Pack |
| Design style | Screw |
| Power | |
| Rated voltage | 12 |
| Amperage | 15 |
| Power rating | 1875 W |
| Supply voltage | 125 V |
| Size & build | |
| Size or dimensions | 114 mm × 69 mm × 42 mm |
| Compatibility | |
| Fit and compatibility | Bathroom vent fans, Night/security lights, Heaters, Regular light/fan switches |
| In the box | |
| Number of items | 12 pack |
| More details | |
| Type of switch | MOSFET |
| Pole configuration | Screw |
| Number of receptacles | HD8213 |
| Receptacle type | 15 A, 125 V |
| Contact form | 1-way |
| Enclosure type | IP54, Wall Mount |
| Mounting | Wall Mount |
| Commercial or home use | Bathroom vent fans, Night/security lights, Heaters, Regular light/fan switches |
Questions about this item
How can I confirm the Fosmon HD8213 timer is running a countdown after installation?
The push button stays illuminated in light blue and the red LED program indicator remains on until the selected countdown finishes, so you can see the active program at a glance.
What hardware is included in the 2-pack and what must I supply myself?
The box contains two in-wall timer switches, two wall plates, four 0.748 in. mounting screws for the wall box and four mounting screws for the switch; you only need to provide a screwdriver.
Which timing option should I select for a bathroom exhaust fan versus an overnight security light?
Choose one of the shorter presets such as 5, 10, 15, 20 or 30 minutes for the fan, and use the 1, 2 or 4 hour settings for lights that need to stay on longer.
More in Timer Switches & Smart Plugs
Similar items
Enerlites HET01-C 18-Setting 15A 120V In-Wall Timer Switch White
- Lights, fans, motor…
- Scheduled
Bryant 4803L 2-Pole Maintained Barrel Key Locking Switch
- Stainless Steel
Black & Decker MH-28015 Outdoor Timer Switch 6 Outlets 125V 12-Pack
- Weather Resistant
- Weather Resistant





