We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

G.SKILL

G.SKILL F5-6000R3036G48GQ4-G5 192GB (4×48GB) DDR5 6000 CL30 ECC Registered Server RAM

SKU CH-W9Y5-XV7HY MPN F5-6000R3036G48GQ4-G5

192 GB quad-channel DDR5 RDIMM kit with ECC, registered buffering, CL30 timing and Intel XMP 3.0 support for Xeon W-2400X workstations

  • Total capacity192 GB (4 × 48 GB)
  • Rated speedDDR5 6000 (PC5 48000)
  • ChipsetIntel W790 Series Chipset (w/ Quad-Channel Memory Support)
  • CAS latencyCL30
  • Memory timings30-36-36-96
  • Rated voltage1.4 V
  • 192 GB quad-channel capacity for heavy workloads
  • DDR5 6000 speed with CL30 latency for fast response
  • ECC registered design protects data integrity
  • Intel XMP 3.0 profile enables one-click overclock
  • Hand-screened ICs tested for stability under load

Capacity and target workloads

This 192GB quad-channel DDR5 kit uses four 48GB registered DIMMs with ECC for data integrity. It is built for Intel Xeon W-2400X series workstations on W790 motherboards that support four-channel memory. Buyers who need consumer DIMMs or non-ECC memory cannot use this kit.

Installation requirements

Modules are 288-pin RDIMMs that require a W790 chipset board with four populated channels and a CPU IMC capable of DDR5 6000 via Intel XMP 3.0. The rated speed and stability depend on motherboard QVL validation and silicon quality. Systems without registered-DIMM support or quad-channel wiring will not boot.

Sustained-load behaviour

Rated at CL30-36-36-96 and 1.40V, the kit delivers PC5-48000 bandwidth with on-die and side-band ECC active. A dedicated temperature sensor allows the platform to monitor thermals during extended rendering or compute sessions. No heat spreader is fitted, so chassis airflow must handle the thermal load.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $4,227.99
Pricier than about 90% of the 6,523 comparable items (median $188.99).
Total capacity 192 GB (4 × 48 GB)
Higher than about 90% of the 6,064 comparable items (median 32 GB).
Price per GB $22.02 per GB
Pricier than about 83% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameG.SKILL
Product lineG5 Series
Model nameF5-6000R3036G48GQ4-G5
Total capacity192 GB (4 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6000 (PC5 48000)
Processor
ChipsetIntel W790 Series Chipset (w/ Quad-Channel Memory Support)
Memory
CAS latencyCL30
Memory timings30-36-36-96
ECC supportYes
Buffer typeRegistered
Kit configurationQuad Channel Kit
Memory profilesIntel XMP 3.0
Heat spreaderNo
Power
Rated voltage1.4 V
Size & build
Shipping weight0.12 kg
Package size244 × 178 × 25 mm

Questions about this item

How do I confirm the kit runs at DDR5 6000 CL30 after enabling XMP 3.0?

Enable the Intel XMP 3.0 profile in BIOS, then verify the operating frequency reads 6000 MT/s and timings show 30-36-36-96 at 1.40V using CPU-Z or the motherboard firmware monitor.

What ships in the box and what must I source separately?

The package contains four 48 GB DDR5 288-pin RDIMMs for a total of 192 GB; a compatible Intel W790 motherboard with quad-channel support and a Xeon W-2400X series processor are required but not included.

Which capacity version should I choose for a quad-channel workstation build?

This F5-6000R3036G48GQ4-G5 kit provides four 48 GB modules, delivering 192 GB across four channels — select it when your workload needs maximum registered ECC capacity at DDR5 6000 CL30.

More in ECC Server RAM

Similar items