G.SKILL Trident Z Royal F4-4000C18D-32GTRG 32GB DDR4 4000 CL18 desktop RAM

Trident Z Royal 32GB DDR4 4000 kit

This dual-channel kit provides 32GB of DDR4 memory running at 4000 MT/s with CL18 timings. It targets enthusiasts building high-performance desktop systems on Intel Z490, Z590 or AMD X570 platforms who also want addressable RGB lighting.

Installing the 288-pin modules

Installation follows the standard 288-pin DIMM procedure; seat each 16GB stick firmly until the retention clips click. The kit is rated for 1.40V, so the XMP 2.0 profile must be enabled in the BIOS to reach the advertised 4000 speed and 18-22-22-42 timings. Without XMP the modules will run at a lower JEDEC frequency. Ensure the motherboard supports the required voltage and frequency before assuming the rated performance will apply automatically.

Checking platform and clearance before ordering

Verify that your motherboard appears on the vendor’s qualified-vendor list for this exact model and that the CPU’s memory controller can sustain DDR4 4000 operation. The crystalline light bar and tall gold heatspreaders increase module height, so confirm sufficient clearance between the DIMM slots and any large CPU cooler or case side panel. Buyers who need ECC or registered memory should look elsewhere, as this kit is unbuffered and non-ECC.