GE Lightech LET-75W-12V-RSL 75W 12V AC Dimming Ballast
A 75 W 12 V AC dimming ballast with 95 % efficiency, TRIAC dimming and auto-thermal regulation
- Power rating75
- 75 W input power for low-voltage lighting loads
- 100 % dimmable with standard TRIAC dimmers, no acoustic noise
- 95 % efficiency at full load reduces heat and extends life
- Auto-thermal regulation cuts output above 90 °C, thermal cut-off at 125 °C
- Compact 33 × 63 × 20 mm aluminium housing fits tight spaces
Product Identity
The GE Lightech LET-75W-12V-RSL is a 75 W electronic transformer that steps 277 V AC input down to an 11.7 V output for low-voltage lighting circuits. It is intended for installers and specifiers who need a compact, dimmable ballast that integrates with standard TRIAC dimmers without audible noise.
Capacity and Headroom
Rated for a continuous 75 W input at a 0.95 power factor, the unit delivers a steady 6250 mA output current. Auto-thermal regulation proportionally reduces output voltage once internal temperature exceeds 90 °C, and a 125 °C thermal cut-off provides a final safeguard, so the transformer gracefully derates rather than failing abruptly under sustained overload.
Thermals Noise and Power
At full load the transformer operates at 95 % efficiency, which limits waste heat and allows the aluminium housing to stay cool within the 50 °C maximum ambient rating. Field-effect transistors replace older bipolar designs to eliminate switching whine, so the ballast remains silent even when dimmed deeply across the 50/60 Hz supply range.
How it compares
Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 80% of the 265 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | GE |
| Power | |
| Power rating | 75 |
Questions about this item
Will the 277 V input connect to the 277 V supply feeding my existing low-voltage fixtures?
The unit accepts 277 V AC at 50/60 Hz with a 0.95 power factor and 0.27 A input current, matching the supply used by many commercial low-voltage runs.
How can I confirm the ballast is operating correctly once installed?
Measure 11.7 V AC at the blue output leads while the TRIAC dimmer is at full level; the output current should read 6250 mA when a 75 W load is connected.
What ships in the box and what must I source separately?
The transformer arrives with black and white input leads plus a blue output lead; you must supply the TRIAC dimmer, low-voltage lamps and any wiring connectors.
More in Lamp Ballasts & Drivers
Similar items
Philips
Philips Advance Xitanium XI040C110V054VPT2 Sensor Ready Ballast 40W
$19.99
0.00024164BTC
In stock
