GE Lighting 72262 GE232MAX-L/ULTRA 120/277V Instant Start Ballast 2 or 1 F32T8 Lamps
Multi-volt instant-start ballast runs one or two F32T8 lamps from 120 to 277 volts with anti-striation control and UL Type CC rating
- Overall sizeLow Power Ballast Factor
- Runs on 120 to 277 volts for flexible installation
- Instant start lights two or one F32T8 lamps
- Anti-striation circuitry stops spiral light patterns
- Active current regulation balances output per lamp
- Mounts in 9 by 0.9 inch footprint with .3 inch slots
Commercial T8 ballast for multi-volt installs
This GE Lighting 72262 ballast drives one or two F32T8 lamps across a 120 to 277 volt supply. The instant-start design suits offices, schools and retail spaces where fluorescent fixtures remain in service. A case of ten units supports larger relamp projects or maintenance stock.
Replaces GE232MAX-L/ULTRA with UL Type CC rating
The unit supersedes the earlier GE232MAX-L/ULTRA model and adds UL Type CC protection against arcing in electrical devices. The upgrade is worthwhile when a project demands the newer safety rating or when existing ballasts show age-related flicker or failure.
Handles two lamps at low power factor
Active current regulation manages each lamp independently while anti-striation circuitry suppresses the spiraling effect that degrades light quality. Cold starts are rated to minus twenty degrees Fahrenheit. The low power ballast factor limits output for energy savings, so the ballast is not suited for applications requiring maximum lumen output from each lamp.
How it compares
Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.
- Price $84.99
- Pricier than about 60% of the 265 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | GE |
| Size & build | |
| Overall size | Low Power Ballast Factor |
Questions about this item
What are the mounting dimensions and slot spacing for the GE 72262 ballast?
The ballast measures 9-Inch long by 0.9-Inch wide with mounting slots set 0.3-Inch apart, so verify your fixture provides this exact footprint before purchasing.
How do I wire the instant-start ballast for one versus two F32T8 lamps, and what mistake should I avoid?
Follow the wiring diagram on the label: use the correct lead wires for a single lamp or both lamps, and never leave an unused lamp lead disconnected — cap it securely to prevent arcing.
What component should I check first if the lamps show striation or fail to start at low temperature?
The anti-striation circuitry and cold-start rating down to -20°F are built into the ballast itself; persistent issues mean the ballast needs replacement rather than a separate part.
More in Lamp Ballasts & Drivers
