GE Lighting GEC340MAX-A Electronic CFL Ballast 99W 120/277V light kit
Electronic CFL ballast runs up to three PL-T lamps at 99 watts on 120 to 277 volt supply with instant start
- Supports up to three compact fluorescent lamps
- Instant-start electronic ballast lights lamps without delay
- Operates on 120 to 277 volts AC for flexible wiring
- Handles 32-watt and 40-watt PL-T lamps
- Rated for reliable starts down to 0 °F
GE Lighting GEC340MAX-A Electronic CFL Ballast
The GE Lighting GEC340MAX-A is an electronic ballast designed for compact fluorescent lamps. It operates on a universal 120 to 277V AC input and supports up to three PL-T type bulbs. This unit suits commercial or residential lighting retrofits needing instant start operation.
Sustained load behaviour
The ballast delivers a maximum lamp wattage of 99W across supported 32W or 40W bulbs. Instant start circuitry energises lamps without pre-heating, reducing ignition delay. With no dimming capability, light output remains constant during continuous operation. Minimum starting temperature is rated at 0 degrees Fahrenheit.
Installation notes
Wiring connects to standard line voltage within the 120 to 277V range. The unit mounts in compatible fixtures designated for PL-T lamps. Installers must verify bulb wattage matches the 32W or 40W specification to avoid damage. No dimming controls are supported, so dimmer switches must not be used.
How it compares
Measured against everything we stock in LED Lighting Kits, at today’s prices. Recalculated every night.
- Price $27.99
- Cheaper than about 60% of the 1,591 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | GE CURRENT |
Questions about this item
How much heat does the 99 W ballast add when it runs all day?
The ballast draws up to 99 W from the 120 to 277 V AC supply, so it releases roughly that much heat into the fixture during continuous operation.
Which lamps must I already have for the GEC340MAX-A to work?
You need three PL-T compact fluorescent lamps rated 32 W or 40 W each; the instant-start ballast supports exactly three bulbs.
Will the ballast start reliably with the older PL-T lamps I already own?
Yes — the instant-start design ignites compatible 32 W or 40 W PL-T lamps down to 0 °F, so existing lamps of those types will start normally.
More in LED Lighting Kits
Similar items
Unique-Bargains 4-Pin 10mm Male-to-Male LED Connector Black
Thomasville Lighting ES-2M60Strip-RGB light kit 6.6Ft 60 LED RGB 5050 IP65 28-key remote
- Light kit inlcuded…
- Light kit inlcuded,…





