GEIST
GEIST XPB128-103L20TL15 208V 30A 3-Ph Delta PDU
Distributes 208 V three-phase delta power through twelve NEMA L6-20R outlets with three 20 A magnetic breakers and a 10 ft twist-lock cord
- 208 V three-phase delta power feeds dense rack loads
- 12 NEMA L6-20R outlets support up to 20 A each
- Three 20 A double-pole magnetic breakers protect every circuit
- 66 in vertical rackmount design fits standard cabinets
- UL 60950 and c-UL listed plus RoHS compliant
3-Phase Delta 208V 30A PDU
The GEIST XPB128-103L20TL15 is a vertical rackmount power distribution unit rated for 208V three-phase delta service at 30 amps. It carries UL and c-UL listing 60950 and RoHS compliance for regulated environments. A 10-foot 10/4 cord ends in a NEMA L15-30P twistlock plug for secure connection.
Suits 66in racks needing twelve locking outlets
This unit fits 66-inch vertical rack space and provides twelve NEMA L6-20R outlets, each protected by one of three 20-amp double-pole magnetic breaker switches. It is not suited for single-phase feeds or plugs other than NEMA L15-30P. Facilities without three-phase delta wiring should select a different power strip.
Three 20A double-pole breakers limit each phase
The internal breaker arrangement splits the 30A input across three 20A double-pole magnetic breakers, capping any single outlet at 20A. Verify that your rack power budget and branch-circuit protection match this layout before ordering.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $477.99
- Typical for this category: the median of 643 items is $451.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What rack height does the 66in vertical rackmount PDU require?
The unit is 66in long and mounts vertically in a standard rack; ensure your cabinet has at least 66in of usable vertical space.
How do I connect the 10ft 10/4 cord with its NEMA L15-30P twistlock plug?
Match the L15-30P plug to a compatible 208V 30A three-phase delta receptacle, twist to lock, then torque the cord strain relief before powering on.
When should the three 20A double-pole magnetic breakers be replaced?
Replace a breaker if it trips repeatedly under normal 20A-per-outlet load, shows physical damage, or fails to reset cleanly after a fault.
More in Rackmount PDUs
Similar items
Tripp Lite PDUMV30HV PDU 30A 208/240V 30 Outlets 6C19 24C13 L6-30P 10ft 0U Vertical
- 0U
- Tested to UL60950-1…
CyberPower CPS1215RM 120V 15A Basic PDU 10 Outlets 15ft NEMA 5-15P 1U
- 1U
- 1U
CyberPower PDU41001 1U Horizontal Switched PDU 8×NEMA 5-15R 12 ft NEMA 5-15P 100-120 V 15A
- 1U
- Switched
Tripp Lite PDUMV20 Metered PDU 20A 28 Outlets 120V 15ft 0U Vertical
- 0U
- 120 V





