We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 9.8ft hardwire cable with small LCD voltage display module

GEKO

GEKO Smart Hardwire Kit with Display 9.8ft

SKU CH-1XV1-ECAQD

A 9.8 ft hardwire kit with an LCD voltage display prevents battery drain when powering compatible dash cams from 12 V to 48 V vehicle systems

  • Product typeDash Installation Kits
  • LCD display shows real-time voltage to monitor battery health
  • Adjustable low-voltage cut-off at 11.6 V to 12.2 V protects car battery
  • 8 ft cable length reaches fuse box in most vehicles
  • Wide 12 V to 48 V input suits cars and trucks
  • 2000 mA output powers compatible dash cams reliably

Smart Hardwire Kit for Dashcams

The GEKO Smart Hardwire Kit with Display is a 9.8 foot cable designed to connect compatible dashcams directly to a vehicle fuse box. It suits drivers who want continuous parking monitoring without draining the starter battery. The built-in LCD shows real-time voltage and the selected cutoff threshold. It is not for owners of dashcams outside the listed myGEKOgear and Papago ranges.

Voltage Protection Thresholds

The kit offers adjustable low-voltage cutoffs at 11.6, 11.7, 11.8, 11.9, 12, 12.1 and 12.2 volts for 12 volt systems, plus matching 23.2 to 24.4 volt steps for 24 volt systems. Input range spans 12 to 48 volts, delivering a regulated 5 volt, 2000 milliamp output. Choosing the correct threshold is the single decision that prevents a flat battery.

Fuse-Box Installation Notes

Installation requires tapping into a constant and a switched fuse slot, then grounding the ring terminal. The 9.84 foot cable reaches most fuse boxes from a windscreen mount. Common issues include picking a fuse that stays live with the ignition off, or setting the cutoff too high for an ageing battery. The timer can also be set to 2, 4, 8, 12, 24 or 26 hours, with an always-on option.

How it compares

Measured against everything we stock in Car Audio Accessories & Wiring, at today’s prices. Recalculated every night.

Price $30.99
Pricier than about 63% of the 2,768 comparable items (median $21.99).

Specifications

Product
Product typeDash Installation Kits
Size & build
Shipping weight0.45 kg
Package size71 × 41 × 18 mm

Questions about this item

How does the 11.6 V low-voltage cutoff protect the car battery in daily use?

The kit monitors the vehicle supply and shuts off the dash cam when voltage drops to the chosen threshold — 11.6 V through 12.2 V for 12 V systems or 23.2 V through 24.4 V for 24 V systems — so the starter battery retains enough charge to start the engine.

What does the 12 V–48 V input range mean for which vehicles the kit can be installed in?

It accepts any DC supply between 12 V and 48 V, covering standard 12 V passenger cars, 24 V commercial vehicles and 48 V mild-hybrid architectures without an extra converter.

Will the 9.84 ft cable and Mini or Micro USB connector reach and fit my Orbit 550 dash cam?

The 9.84 ft length runs from the fuse box to most windscreen mounts, and the supplied Mini or Micro USB plug matches the Orbit 550 power port listed in the compatibility table.

More in Car Audio Accessories & Wiring

Similar items