We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two grey rectangular thermal pads on white background

GELID SOLUTIONS

GELID SOLUTIONS GP-Ultimate 15W/mK Thermal Pad 90x50x1.0mm 2pcs

SKU CH-JC20-HWMSA

High-conductivity 15W/mK thermal pad fills gaps on GPUs, motherboards and SMD components, non-conductive and stable from -60°C to 220°C

  • 15 W/mK conductivity for high-performance heat transfer
  • Non-electrically conductive design prevents short circuits
  • Operates from -60 °C to 220 °C for extreme environments
  • 90 × 50 × 1.0 mm pads fit large GPU and motherboard surfaces
  • Two-piece pack simplifies multi-component installation

High-conductivity thermal pad for uneven surfaces

The GELID SOLUTIONS GP-Ultimate thermal pad delivers 15W/mK conductivity to bridge gaps between heatsinks and components with varying heights. It targets builders servicing GPU cards, motherboards, laptops and consoles where standard paste cannot maintain contact across stepped PCB layouts. The non-electrically conductive, non-corrosive material remains pliable from -60°C to 220°C without curing or hardening over time.

Sustained load stability across wide temperature

Under continuous operation the pad maintains its thermal path without pumping out, drying or becoming brittle, thanks to a multilayer matrix that resists phase change. Its non-curing formulation keeps pressure distribution consistent across MOSFETs, chipsets and memory ICs during prolonged high-temperature cycles. The 1.0mm thickness in this pack suits components with moderate stack height while the 90x50mm sheet covers large VRM arrays or memory banks in a single piece.

15W/mK conductivity rating decides fit

The 15W/mK figure is the single metric that determines whether this pad meets the thermal resistance budget for a given heatsink-to-die gap. Buyers needing lower conductivity for thinner bond lines or higher conductivity for direct-die replacement should select a different grade. This two-piece pack provides 90x50mm pads at 1.0mm thickness; other thicknesses from 0.5mm to 3.0mm exist but are not included here.

How it compares

Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.

Price $14.99
Pricier than about 60% of the 498 comparable items (median $12.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How much heat does the 15 W/mK pad move when the GPU runs all day?

The pad is rated at 15 W/mK and operates continuously from -60 °C up to 220 °C, so it maintains steady heat transfer during extended loads.

What components must already be in place for these 90x50x1.0 mm pads to fit?

You need a heatsink or cooler mounting surface that matches the 90 mm by 50 mm footprint and a 1.0 mm gap between the die and the heatsink.

Will the 1.0 mm thickness work on an older card that originally used a .5 mm pad?

The 1.0 mm pad is twice as thick as a .5 mm pad; it will only seat correctly if the original design allows a 1.0 mm stack height.

More in Thermal Paste

Similar items