We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two light-grey thermal pads, 90 by 50 by 3.0 mm, on a plain background

GELID SOLUTIONS

GELID SOLUTIONS GP-Ultimate 15W Thermal Pad 90x50x3.0mm 2pcs

SKU CH-CVVQ-FGQ99

High-conductivity 15 W/mK thermal pads measuring 90 × 50 × 3.0 mm, non-conductive and non-curing, supplied as a two-piece pack for large PCB surfaces

  • 15 W/mK thermal conductivity transfers heat efficiently
  • Non-electrically conductive material prevents short circuits
  • Soft 3.0 mm thickness fills uneven component gaps
  • Two 90 × 50 mm pads cover large GPU or motherboard areas
  • Operates reliably from –60 °C to 220 °C

High-conductivity thermal pad for GPUs and boards

The GP-Ultimate pad delivers 15 W/mK conductivity to bridge gaps between heatsinks and uneven PCB surfaces such as MOSFETs, chipsets and memory ICs. It suits graphics cards, motherboards, laptops and consoles where component heights vary. Buyers needing a liquid metal or paste for direct-die CPU contact should look elsewhere.

Simple peel-and-place fitting with no curing

Each 90×50 mm sheet is cut to size, placed on the target area and compressed by the heatsink; no spreading tools or drying time are required. The material is non-electrically conductive, non-corrosive and non-hardening, so accidental overflow cannot short adjacent traces. Over-compression beyond the 3.0 mm thickness may reduce long-term compliance.

15 W/mK rating decides suitability

This single figure determines whether the pad can move enough heat for your specific hotspot; lower-conductivity pads will run warmer under the same load. The pad operates from -60 °C to 220 °C and is offered in 0.5, 1.0, 1.5, 2.0 and 3.0 mm thicknesses to match different gap heights.

How it compares

Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.

Price $25.99
Pricier than about 82% of the 498 comparable items (median $12.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the 15 W/mK pad is performing after installation?

Check that component temperatures drop under load and the pad stays flexible across the -60 °C to 220 °C operating range without hardening.

What does the 2-pack contain and what else is needed?

Two 90 × 50 mm pads at 3.0 mm thickness; no extra compound or tools are required for installation.

Which thickness should I choose for a GPU VRM gap?

The 3.0 mm option fills larger uneven gaps; thinner 0.5, 1.0, 1.5 or 2.0 mm pads suit tighter clearances.

More in Thermal Paste

Similar items