We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm fans with thick 30mm frames and double-sided ARGB lighting

Geometric Future

Geometric Future Squama 3003W-12 120mm 30mm White ARGB case fan 3-pack

SKU CH-ZGX8-VR565

Extra-thick 30 mm 120 mm fans deliver 84 CFM and 2.93 mmH₂O with double-sided ARGB and PWM control in a three-pack

  • Fan depth30 mm
  • Bearing designHydro Bearing
  • Rotational speed800 to 2,250 RPM
  • Airflow rate84 CFM
  • Air pressure rating2.93 mmH2O
  • Operating noise35.8 dBA

Color White

Model Squama 3003 / 120x30mm Standard

Model 3 Packs

  • 30 mm thick frame boosts static pressure to 2.93 mmH2O
  • 84 CFM airflow at up to 2250 RPM for strong case cooling
  • Double-sided ARGB lighting syncs with 5 V motherboard headers
  • Hydro dynamic bearing cuts vibration and extends service life
  • PWM control from 800 RPM balances performance and 35.8 dBA noise

30mm-thick triple-fan kit

This three-pack supplies three 120mm case fans built with a 30mm frame instead of the usual 25mm depth. The extra thickness guides air more efficiently through radiators and restrictive case meshes. Each unit uses a hydro-dynamic bearing and a nine-blade impeller rated for 84 CFM airflow and 2.93 mmH2O static pressure. The white finish and double-sided addressable RGB lighting suit showcase builds that want visible illumination from either side.

Sustained-load behaviour

PWM control spans 800 to 2250 RPM, letting the motherboard ramp speed gradually as component temperatures rise. At the top of the range the fans produce 35.8 dBA while maintaining the rated pressure figure, so airflow does not collapse when a radiator or dense filter adds resistance. The hydro-dynamic bearing is designed for continuous operation without the wear patterns that can affect sleeve bearings under long-term heat. Vibration stays low thanks to the textured dragon-scale frame structure.

5V ARGB and PWM limits

Lighting requires a standard 5V three-pin addressable RGB header; older 12V four-pin RGB headers will not drive the LEDs and can damage them. The four-pin PWM connector handles speed signalling only and does not supply power for the lighting circuit. Motherboards without a 5V ARGB header cannot synchronise the fans’ colours without a separate controller. The 30mm thickness may conflict with slim radiator brackets or tight side-panel clearances that assume 25mm fans.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $36.99
Pricier than about 82% of the 8,339 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameGeometric Future
Product lineSquama 3003-12
Product typeCase Fan
Product colorWhite
Performance
Rotational speed800 to 2,250 RPM
Airflow rate84 CFM
Air pressure rating2.93 mmH2O
Power
Power input connector4 Pin
Size & build
Fan depth30 mm
Bearing designHydro Bearing
Product dimensions120 × 120 × 30 mm
Compatibility
Compatible withCase
Environment & compliance
Operating noise35.8 dBA
More details
LED lightingAddressable RGB

Other versions of this model

5 more in the same range

Questions about this item

How loud is the 35.8 dBA noise level when the Squama 3003W-12 fans run continuously at full 2250 RPM?

At maximum speed the three fans produce 35.8 dBA each, a level comparable to a quiet library; the hydro-dynamic bearing and dragon-scale frame keep vibration low so the sound stays steady during all-day operation.

Does my motherboard need a 5 V 3-pin ARGB header to use the double-sided lighting on these 120 mm fans?

Yes, the addressable RGB LEDs connect via a standard 5 V 3-pin ARGB header; without that header the fans will still spin but the lighting cannot be synchronised or controlled.

Will the 30 mm thick frames fit alongside my existing 25 mm fans in a push-pull radiator setup?

The 30 mm thickness adds 5 mm per fan, so clearance must be checked; they can work in push-pull if the radiator and case allow the extra depth, but the thicker frame may contact adjacent components in tight builds.

More in PC Cooling Fans

Similar items