We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
2U rack server chassis, matte black finish, front drive bays visible

GIGABYTE

GIGABYTE E263-Z34-ACJ1 barebone server EPYC 9004/9005 SP5 12 DIMMs 2 GPU

SKU CH-60RS-66QSS MPN E263-Z34-ACJ1

Edge server barebone supporting AMD EPYC 9004/9005 processors with 12 DDR5 DIMM slots and two dual-slot Gen5 GPU bays

  • ProcessorAMD EPYC 9004 Series
  • Processor socketSocket SP5
  • Target workloadEdge Server
  • Dual EPYC 9004/9005 processors power edge workloads
  • 12 DDR5 RDIMM slots deliver high memory bandwidth
  • Two Gen5 GPU slots accelerate compute tasks
  • 5-inch NVMe/SATA/SAS hot-swap bays enable fast storage
  • Dual ROM architecture adds firmware resilience

Edge barebone for dual Gen5 GPUs

This 2U barebone server is built for edge workloads that demand two full-height PCIe Gen5 graphics cards. It accepts a single AMD EPYC 9004 or 9005 processor in an SP5 socket and provides twelve DDR5 RDIMM slots for memory expansion. The platform targets inference, rendering or compute tasks at the network edge.

Rear hot-swap bays and dual ROM

Two 2.5-inch drive bays on the rear panel support Gen5 NVMe, SATA or SAS-4 media with hot-swap capability. A single 1 Gb/s LAN port uses an Intel I210-AT controller. Dual ROM architecture adds firmware redundancy, while an M.2 slot with PCIe Gen3 x4 interface offers additional storage flexibility.

Two full-height PCIe Gen5 x16 GPU slots

The chassis provides two full-height, full-length PCIe Gen5 x16 slots specifically for dual-slot GPUs. This fixed GPU capacity defines the system's role: it suits workloads that need exactly two accelerators and cannot scale beyond that count. Buyers needing more than two GPUs or a different slot layout should consider other platforms.

How it compares

Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.

Price $1,726.99
Cheaper than about 72% of the 532 comparable items (median $2,503.49).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Target workloadEdge Server
Processor
ProcessorAMD EPYC 9004 Series
Processor socketSocket SP5
Size & build
Shipping weight18.21 kg
Package size737 × 584 × 292 mm

Questions about this item

What PCIe generation do the two GPU slots use, and what bandwidth does that cap each card at?

Both full-height full-length slots are PCIe Gen5 x16, so each GPU can run at up to Gen5 x16 bandwidth.

What chassis depth and rear clearance are needed for the dual-slot Gen5 GPUs and the 2.5-inch hot-swap bays?

The 2U rackmount chassis accepts two dual-slot Gen5 GPUs internally and provides two 2.5-inch hot-swap bays at the rear, so allow standard 2U depth plus cable bend radius behind the bays.

How are the GPUs installed, and which step is most often missed?

Remove the riser brackets, seat each GPU into a PCIe Gen5 x16 slot, secure the retention screws, then connect auxiliary power cables from the PSU — forgetting the power cables is the common miss.

More in Barebone Servers & DIY Kits

Similar items