GIGABYTE X570S AERO G AMD motherboard

AMD X570S ATX board for Ryzen creators

The GIGABYTE X570S AERO G uses the AMD X570 chipset and AM4 socket to support Ryzen 5000, 4000 G-Series, 3000 and 2000 series processors. Four DDR4 slots accept up to 128 GB of un-buffered memory at speeds up to 3200 MT/s. Dual-channel architecture and ECC support suit workstation workloads. Three PCI Express 4.0 x16 slots and six SATA 6Gb/s ports provide expandability for multi-GPU and storage arrays. Intel 2.5 GbE LAN and WIFI 6 handle high-throughput networking.

Straightforward ATX install with clear slot rules

Standard ATX mounting holes align with common chassis standoffs. The primary PCI Express 4.0 x16 slot connects directly to the CPU for optimum graphics performance; the PCIEX8 slot shares bandwidth with M.2 devices, so populate it only after confirming lane allocation. M.2 screw standoffs for 2242, 2280 and 22110 lengths are pre-installed. The 24-pin and 8-pin CPU power connectors sit at the board edge for easy cable routing. Rear I/O shield is integrated, removing a separate fitting step.

Verify CPU, memory and cooler clearance first

Confirm your Ryzen processor generation matches the supported memory speeds: 5000 and 4000 G-Series reach 3200 MT/s, while 3000 G-Series and 2000 series top out at 2933 MT/s. Quad-channel kits are not supported; populate slots in pairs for dual-channel operation. Large air coolers may overhang the first PCI Express slot or M.2 heatsink — check cooler dimensions against the board layout. Ensure the power supply delivers both 24-pin and 8-pin EPS connectors for full CPU power delivery.