GPERHUAN 120mm ARGB Case Fan 6 Pack with Controller
Six 120 mm ARGB fans with a wired controller and remote deliver 33.42 CFM airflow at 20.1 dBA using hydraulic bearings and 24 LEDs each
- Product typeCase Fan
- Product colorBlack
- Quiet operation at 20.1 dBA with hydraulic bearing and rubber pads
- 24 ARGB LEDs per fan for vivid, independently controlled lighting effects
- 42 CFM airflow and 0.87-1.62 mmH2O pressure for effective cooling
- Wired controller and remote adjust speed, brightness and effects without motherboard sync
- Six fans and hub install together, compatible with major motherboard RGB ecosystems
Six-Fan ARGB Kit with Controller
The GPERHUAN pack contains six 120mm black case fans, a wired ARGB controller and a remote. Each fan uses a hydraulic bearing and rubber pads to keep noise down to 20.1 dBA while moving 33.42 CFM at 0.87–1.62 mmH2O static pressure.
Builders Who Want Plug-and-Play Lighting
Suits anyone adding synchronized colour to a new or existing chassis without digging into motherboard software. Not for systems that lack a 5V 6-pin ARGB header or builders who need PWM curves tied to CPU temperature sensors.
Drops Into Standard 120mm Mounts
Fans screw into any 120mm intake or exhaust point and draw power through the included hub, freeing motherboard headers for other devices. The controller handles lighting effects, brightness and speed for all six units from a single wired remote.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 63% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
Questions about this item
Do I need a 5 V 6-pin ARGB header on my motherboard to use the included controller?
No, the wired controller and remote let you set lighting effects, brightness and fan speed for all six fans without connecting to a motherboard header.
Will the bundled hub control RGB on my existing 4-pin PWM fans?
The hub only synchronises 6-pin fans of this brand; it does not drive standard 4-pin PWM or 3-pin ARGB fans.
How can I confirm each fan is running at the advertised 20.1 dBA minimum noise level?
Use a decibel meter at the case intake; the hydraulic bearing and rubber pads are designed to keep sound at or below 20.1 dBA under normal load.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-2000 PWM 140mm 2000 RPM case fan
- 140 × 140 × 25 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-BlasterPWM 120x38 case fan 38mm 1300-6500 RPM 318 CFM
- 1 Fan
- Case Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Antec NOVA 120 120mm case fan fluid dynamic bearing 4-pin PWM
- 120 mm
- 1 Fan





