We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular red LED clearance lamp with optic lens, polycarbonate housing, screw mount, 2 inch height, 4 13/16 inch width

Grote

Grote 47162 Clearance Marker Lamp LED Red

SKU CH-MBKB-WT9V1

Red LED clearance marker lamp with hermetic lens seal and screw mounting for FMVSS 108 compliance

  • Product colorRed
  • Overall width2 in (5.08 cm)
  • FMVSS 108 compliant for legal road use
  • Hermetic lens seal blocks moisture and debris
  • LED technology draws only .5 amp
  • Polycarbonate housing resists impact and UV
  • Compatible with pin connectors 66910 66911 67070 67071

Grote 47162 LED Clearance Lamp

The Grote 47162 is a rectangular red LED clearance marker lamp built for vehicle visibility. It uses a polycarbonate housing with a hermetic lens seal and meets FMVSS 108 and SAE P2, PC standards for road use.

Replaces incandescent clearance lamps

This unit replaces older incandescent clearance lights that draw more current and lack a sealed lens. The upgrade is worth it when you need lower 0.5 A draw, longer LED life and a hermetic seal that keeps moisture out of the housing.

Check mounting and wiring before ordering

Verify the screw-mount pattern fits your existing bracket holes and that the male pin connector matches one of the compatible models 66910, 66911, 67070 or 67071. Confirm the overall width of 4 13/16 in clears the mounting surface on your vehicle.

How it compares

Measured against everything we stock in Workshop Hardware, Springs & Clamps, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 55% of the 383 comparable items (median $17.99).

Specifications

Product
Brand nameGROTE
Product colorRed
Size & build
Overall width2 in (5.08 cm)

Questions about this item

What screw spacing does the 47162 lamp need for mounting?

The lamp mounts with screws on a rectangular body measuring 4 13/16 in wide by 2 in high; drill holes to match that footprint.

Which wiring step is most often missed when fitting the male pin connector?

The connector plugs into Grote harnesses 66910, 66911, 67070 or 67071; the step installers skip is fully seating the pin until the latch clicks, otherwise the 0.5 A circuit stays open.

What part of the 47162 fails first and needs replacement?

The hermetic lens-to-housing seal is the wear item; once moisture breaches it the LED module cannot be serviced separately, so the whole lamp is replaced.

More in Workshop Hardware, Springs & Clamps

Similar items