We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red oval stop turn tail light incandescent lens 6-1/4 inch length

Grote

Grote 52782 Stop/Turn/Tail Light Oval Red 6-1/4 in

SKU CH-N3CR-NKB7S

Oval red stop, turn and tail light with incandescent bulb and female-pin connection for 0.48–2.1 A circuits

  • Incandescent stop, turn and tail functions combined
  • Red oval lens signals clearly to following traffic
  • 48 to 2.1 A draw suits standard 12 V systems
  • Female pin connector fits multiple Grote harnesses
  • 6-1/4 inch length matches common oval cut-outs

Grote 52782 Oval Red Light

The Grote 52782 is an oval red stop, turn and tail light built for vehicle lighting systems. It uses incandescent technology and carries a 6-1/4 inch overall length for standard mounting locations.

Capacity and headroom

The lamp draws between .48 and 2.1 amps across its functions, giving enough headroom for combined stop and tail operation on 12-volt circuits. It runs out of headroom if the vehicle wiring cannot supply the peak current or if a sealed connector is required.

Upgrade path

This light replaces an existing oval incandescent unit with a female pin connection. The jump is worth it when the old lens is cracked, the filament has failed or the housing has corroded beyond repair.

How it compares

Measured against everything we stock in Workshop Hardware, Springs & Clamps, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 85% of the 383 comparable items (median $17.99).

Specifications

Product
Brand nameGROTE

Questions about this item

Will the 0.48 to 2.1 A draw work with my older 12 V wiring?

The light draws between 0.48 A and 2.1 A at 12 V, so existing 12 V circuits rated for at least 2.1 A will support it without upgrades.

How do I confirm the stop, turn and tail functions are working after installation?

Apply 12 V to the female pin connector; the red lens should illuminate steadily for tail, brighter for stop, and flash for turn when the corresponding circuit is energised.

Does the package include a mating connector or must I buy part 66811 separately?

The light ships with the female pin housing only; a compatible plug such as 66811, 66812, 66825, 66843, 66844, 67000, 67014, 67020 or 67090 must be sourced separately.

More in Workshop Hardware, Springs & Clamps

Similar items