Grote 61121 WhiteLight Dome Light, Rectangular, Clear, 12V DC
Rectangular LED dome light with clear lens for 12 V DC surface mounting
- Bright LED illumination for clear visibility
- Rectangular clear lens distributes light evenly
- 12 V DC power suits vehicle electrical systems
- Surface-mount design enables quick installation
- Blunt-cut wiring included for immediate connection
Grote 61121 WhiteLight Dome Light
The Grote 61121 is a rectangular LED dome light built for 12V DC electrical systems. It belongs to the WhiteLight series and uses a clear lens to deliver white illumination. The fixture is suited to vehicle interiors, equipment cabs and similar low-voltage applications where a slim surface-mounted light is needed.
Build quality and daily use
The housing measures 7 11/16 in long, 9/16 in wide and 4 3/4 in high, giving a low profile that fits tight overhead spaces. A surface-mount design lets it fasten directly to flat panels without a cut-out. The blunt-cut electrical connection is included, so the installer must terminate the wires to match the existing harness.
What to check before ordering
Confirm the circuit operates at 12V DC and that the mounting surface can accommodate the stated length and height. Verify the clear lens colour matches the intended lighting effect. The product is restricted from sale in certain states; ensure local regulations permit its use. Buyers needing a different voltage, lens colour or recessed mounting should look elsewhere.
How it compares
Measured against everything we stock in Workshop Hardware, Springs & Clamps, at today’s prices. Recalculated every night.
- Price $41.99
- Pricier than about 81% of the 383 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | GROTE |
Questions about this item
What voltage does the 12V DC dome light operate on?
The light runs on a 12V DC electrical system, typical for many vehicles and equipment.
What are the overall length and height dimensions for surface mounting?
The rectangular housing measures 7 11/16 inches long and 4 3/4 inches high for surface installation.
How is the blunt-cut electrical connection installed correctly?
Strip the blunt-cut wires and connect them to a 12V DC power source with proper polarity; the step often missed is securing the connection against vibration and moisture.
More in Workshop Hardware, Springs & Clamps
Similar items
De-Sta-Co 5105-R Vertical Hold-Down Clamp 700 lb Machine Shop Hardware
Bessey Parallel Clamp 31 in 1700 pressure machine shop hardware
- HAWA
Renewable Lubricants Parts Cleaner Degreaser 5 gal Pail 86634 machine shop hardware
- HAWA





