Grote 61491-5 Rectangular Dome Light 12V Clear White
Rectangular 12 V dome light with clear lens and blunt-cut leads for surface-mount installation
- Rectangular shape fits tight machine-shop spaces
- 12V DC operation suits standard vehicle electrics
- Clear lens delivers bright white illumination
- Surface-mount design with screw holes for secure install
- Blunt-cut leads included for direct wiring
Rectangular 12V Dome Light
The Grote 61491-5 is a rectangular dome light designed for 12V DC electrical systems. Its clear lens emits white illumination suitable for interior or exterior machine shop applications. The unit mounts directly to surfaces using screws for a secure fit. Electrical connection is provided via an included blunt-cut wire lead.
Sustained 12V DC operation
The fixture operates continuously on a 12V DC supply without a specified maximum brightness limit. Steady voltage input maintains consistent light output over extended periods. The sealed construction protects internal components during prolonged use in industrial environments. Heat dissipation is managed passively through the housing.
Screw-mount surface installation
The light requires a flat surface for its screw-mount base measuring 4 9/16 inches in length and 1 3/4 inches in width. Installers must ensure the mounting area accommodates these exact dimensions. The 2 1/2 inch overall height determines the vertical clearance needed above the mounting plane. Buyers without a suitable flat surface cannot use this fixture.
How it compares
Measured against everything we stock in Workshop Hardware, Springs & Clamps, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 77% of the 383 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | GROTE |
Questions about this item
How much heat does the 12V dome light produce when left on all day?
The light draws low current at 12V DC, so heat output stays minimal during continuous operation.
What mounting hardware must I already have to install the rectangular dome light?
You need screws that match the surface-mount holes and a 12V DC power source with blunt-cut leads.
Will the clear lens work with older 12V vehicle wiring that uses blunt-cut connections?
Yes, the included blunt-cut electrical connection is designed for direct splice into existing 12V circuits.
More in Workshop Hardware, Springs & Clamps
Similar items
CRAFTSMAN Deep Socket SAE 3/8-Inch Drive 7/8-Inch 6-Point CMMT43339
- Out-Opening, Narrow…
- Steel
De-Sta-Co 5105-R Vertical Hold-Down Clamp 700 lb Machine Shop Hardware
GAO462 K-Lock Nuts 1/4"-20 304 Stainless Steel 50 Pieces
- GAO462, Litoexpe
- Steel
Renewable Lubricants Parts Cleaner Degreaser 5 gal Pail 86634 machine shop hardware
- HAWA





