We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

GS108D 8-Port Gigabit Network Switch 16 Gbps

SKU CH-73HV-7Z1EK MPN GS108D

An unmanaged 8-port Gigabit switch with 16 Gbps capacity, 11.904 Mpps forwarding, 4 Mbit buffer, fanless operation and up to 170 m cable support

  • Supported standardsPassive PoE
  • Network cablingRJ45
  • Management typeUnmanaged
  • Uplink ports8
  • Uplink portsRJ45
  • Uplink connection10/100 Mbit/s
  • Add 8 Gigabit ports for PCs, printers and cameras with unmanaged plug-and-play simplicity
  • Supports cable runs up to 170 m on Cat5e or higher for larger layouts
  • 16 Gbps switching capacity and 11.904 Mpps forwarding rate reduce multi-device congestion
  • IGMP Snooping, loop detection and 802.3x flow control keep everyday networks running reliably
  • Fanless, 2.75 W max draw and compact housing allow silent desktop or wall-mount placement

8-Port Gigabit Switch for Wired Expansion

The GS108D adds eight RJ45 ports running at 10/100/1000 Mbps for connecting PCs, printers, cameras and access points. Unmanaged plug-and-play operation keeps setup simple for home or small-office networks. No configuration software is required to start passing traffic.

16 Gbps Switching Capacity Under Sustained Load

A 16 Gbps switching fabric and 11.904 Mpps forwarding rate move multi-device streams without bottlenecks. The 4 Mbit packet buffer absorbs bursts while 9216-byte jumbo frames improve efficiency with compatible endpoints. IGMP Snooping and loop detection keep multicast and topology stable during continuous use.

Fanless Design with 2.75 W Maximum Draw

Silent operation comes from a completely fanless enclosure suitable for desktop or wall mounting. IEEE 802.3x flow control reduces packet loss when congestion occurs. The switch consumes a maximum of 2.75 W, minimising heat and energy cost in always-on deployments.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 97% of the 2,759 comparable items (median $482.99).

Specifications

Product
Product lineProSafe
Part numberGS108D
Performance
Forwarding rate1,000 Mbit/s
Memory
Buffer size768 KB
Connectivity
Supported standardsPassive PoE
Network cablingRJ45
Management typeUnmanaged
Uplink connection10/100 Mbit/s
Main port speed10/100 Mbit/s + 1,000 Mbit/s
Management accessRJ45
Jumbo frame support9216 bytes
SNMP supportNo
Layer support1
Ports & slots
Uplink ports8
Main ports8
Main port typeRJ45
Power
Power over EthernetNo
Total PoE powerStandard
Power detailsAC 120/230 V ( 50/60 Hz )
Max power draw28 V
Size & build
Product dimensions14.33 in W × 12.83 in H × 9.06 in D
Product weight200 g
In the box
In the boxInstruction manual, cable or connector.
Environment & compliance
ComplianceTrue, not applicable
More details
IPv4 featuresStandard
Security featuresYes
Control buttonsTouch

Questions about this item

How much heat and noise does the GS108D produce when running continuously?

The fanless design means silent operation with no moving parts, and maximum power draw is 2.75 W, so heat output stays very low even under full load.

What cables and power source are required to get the GS108D working out of the box?

Eight RJ45 Ethernet cables (Cat5e or better) for the 10/100/1000 Mbps ports and a standard AC outlet for the included power adapter are all that is needed.

Will the GS108D work reliably alongside older 10/100 Mbps devices I still use?

Each of the eight RJ45 ports auto-negotiates down to 10 or 100 Mbps, so legacy gear connects without configuration while Gigabit devices run at 1000 Mbps.

More in Ethernet & PoE Switches

Similar items