We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3.5 inch colour LCD module with capacitive touchscreen and acrylic case

GSM Outdoors

GSM Outdoors 3.5" ESP32-3248S035C 320x480 Capacitive Touchscreen 2 in 1 accessory

SKU CH-Z0DE-0TJ9J

A 3.5 inch ESP32 development board with 320x480 capacitive touchscreen, WiFi and Bluetooth, 240MHz dual-core MCU, 4MB flash, TF card slot, and acrylic case

  • 5-inch capacitive touchscreen with 320x480 resolution for clear visuals
  • ESP32-S3 dual-core MCU at 240MHz enables fast processing
  • 4MB+4MB flash and 520KB SRAM provide ample storage
  • Multiple interfaces including TF card slot and sensor ports expand functionality
  • Supports Arduino IDE, ESP-IDF and MicroPython for flexible development

3.5-inch ESP32-S3 touchscreen module

This 3.5-inch LCD module pairs an ESP32-S3 dual-core MCU running at up to 240 MHz with a 320 x 480 capacitive touchscreen driven by an ST7796 controller. It ships with an acrylic case and includes a TF card slot, DHT11 sensor interface, serial port and reserved I/O pins for expansion. The board is programmable in Arduino IDE, ESP-IDF, MicroPython and Mixly, making it suited to makers, educators and embedded developers who need a compact all-in-one display and compute unit.

Sustained-load behaviour

The module draws about 120 mA at 5 V during typical operation and is rated for continuous use from -20 °C to 70 °C, with storage tolerance down to -30 °C and up to 80 °C. On-board backlight, speaker, ambient-light and RGB-LED circuits are integrated, so the board maintains stable output without external driver boards during long-running display or sensor-logging tasks.

320 x 480 resolution and 4 MB + 4 MB flash

The 320 x 480 pixel panel and 8 MB total flash capacity determine how much graphical data and application code can reside on the device. Projects needing higher pixel counts, larger asset storage or a different display interface will require a different module.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $43.99
Cheaper than about 73% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How warm does the 3.5" ESP32-3248S035C module get when it runs all day at 240 MHz?

Operating temperature range is -20 °C to 70 °C and power consumption is about 120 mA at 5 V, so heat stays low during continuous use.

What power source and programming tool must I already have to use this display?

You need a 5 V supply capable of 120 mA and a PC with Arduino IDE, ESP-IDF, MicroPython or Mixly to flash code via the serial interface.

Can the TF card slot and DHT11 sensor port work with older Arduino boards I already own?

The TF slot and DHT11 port are wired to the on-board ESP32-S3; they are not exposed as standalone shields for legacy Arduino boards.

More in 2-in-1 Device Accessories

Similar items