We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projector lamp module with housing, rectangular grey finish

GSM Outdoors

GSM Outdoors NP07LP/LV-LP31 2 in 1 accessory

SKU CH-0YE6-1Y3ST

Replacement projector lamp with housing fits NEC and Canon models, rated for 3000-4000 hours

  • Replaces NEC and Canon projectors with exact-fit NP07LP/LV-LP31 housing
  • Ready-to-install module swaps in minutes without professional help
  • 3000-4000 hour rated life maintains cinema-grade brightness
  • Each unit tested before shipping for consistent output stability
  • 200 day manufacturer-backed coverage included

Compatible projector lamp module

The NP07LP/LV-LP31 replacement lamp ships as a complete module with housing for straightforward installation. It fits a wide range of NEC and Canon projectors including NP300, NP400, NP500, NP600 and LV-7275, LV-7375, LV-8300 series models. Each unit is tested before dispatch to confirm brightness and output stability matching the original factory specification. Rated service life falls between 3000 and 4000 hours of operation.

For owners of listed NEC and Canon units

This lamp suits anyone whose compatible projector shows an orange indicator, on-screen replacement message or noticeably dimmer and blurrier output. It is not intended for projectors outside the supported model list, so buyers with different makes or unlisted model numbers should look elsewhere. The 200-day warranty period covers early-life failures but does not extend to labour or shipping costs. Professional installation is not required, yet users uncomfortable with opening the projector casing may prefer a technician.

Ready-to-fit housing simplifies swap

The bundled housing means the old module slides out and the new one slides in without handling a bare bulb. Replacement steps are: power off, unplug, cool for at least an hour, remove the lid screws, open the lamp cover, undo the two retaining screws, pull the old module straight out and insert the replacement. No additional tools beyond a screwdriver are supplied or needed. Technical support remains available from the manufacturer for any fitting questions.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $49.99
Cheaper than about 60% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Which NEC or Canon projector models accept the NP07LP/LV-LP31 lamp with housing?

The lamp fits NEC NP300, NP400, NP500, NP500W, NP600, NP300A, NP410W, NP510W, NP610, NP610SG, NP500WS, NP510WS, NP600S, NP610S, NP510WG, NP500WSG, NP510WSG, NP510WSGEDU and Canon LV-7275, LV-7370, LV-7375, LV-7385, LV-8215, LV-8300, LV-8310 projectors.

Can I keep using my existing projector mount and cables when I install this replacement lamp?

Yes, the lamp module slides into the same housing slot and uses the original power connector, so your current mount, cables and remote control continue to work unchanged.

How do I confirm the new lamp is operating correctly after installation?

Power on the projector; the orange warning indicator should stay off, the on-screen replacement message should disappear, and the image should return to full brightness and sharpness for the rated 3000–4000 hour life.

More in 2-in-1 Device Accessories

Similar items