We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten silver UHF male crimp connectors with gold centre pins and heat-shrink sleeves

GSM Outdoors

GSM Outdoors PL-259 UHF Male Crimp Connector 10 Pack for RG58 LMR195 RG400 3D-FB KSR195 Cable

SKU CH-3RNH-EFK9Z

Pack of 10 UHF male crimp connectors for RG58, RG400, LMR195, 3D-FB or KSR195 cable with gold-plated pin and nickel-plated shell

  • Gold-plated pin and nickel-plated shell ensure strong conductivity and corrosion resistance
  • Signal loss below .1 dB at 450 MHz with SWR under 1.15 for low-loss links
  • Works with RG58, RG400, LMR195, 3D-FB and KSR195 coaxial cables
  • Pack includes 10 PL259 crimp connectors plus heat-shrink tubing for quick assembly
  • UHF male design mates directly with UHF female connectors

Pack of 10 UHF male crimp connectors

This pack contains ten PL-259 connectors built for RG58, RG400, LMR195, 3D-FB and KSR195 coaxial cables. Each connector uses a gold-plated copper centre pin and a nickel-plated copper shell for reliable conductivity and corrosion resistance. The included heat-shrink tubing simplifies the crimp-and-seal installation process. They are suited for RF jumper assemblies up to 450 MHz.

Installers needing quick, low-loss UHF terminations

Technicians building or repairing antenna feeds for amateur radio, CB or commercial two-way systems will appreciate the sub-0.1 dB insertion loss and SWR below 1.15 at 450 MHz. The bulk pack reduces per-connection cost for multi-site deployments. Users requiring N-type, BNC or SMA interfaces, or those working with larger-diameter cables such as LMR400, should select a different connector series.

Ten connectors handle multiple antenna runs

Ten pieces provide enough terminations for several mobile or base-station installations with spare units for field repairs. The crimp design keeps loss under 0.1 dB at 450 MHz, so signal integrity remains high across typical VHF/UHF bands. Performance degrades above the specified frequency range, and the connector body does not accommodate cables thicker than the listed RG58-class types.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $35.99
Cheaper than about 90% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What cable types must I already have to crimp these PL-259 connectors?

These connectors are built for RG58, RG400, LMR195, 3D-FB and KSR195 coaxial cable, so you need one of those cable types on hand before you start.

Will the gold-plated centre pin and nickel-plated shell work reliably with my older UHF female bulkhead?

The copper gold-plated needle and copper nickel-plated shell give good conductivity and corrosion resistance, so they mate cleanly with existing UHF female connectors.

How can I confirm the crimped joint is performing correctly after assembly?

Expect insertion loss below 0.1 dB at 450 MHz and an SWR under 1.15; measuring those figures with a suitable analyser verifies the connection.

More in 2-in-1 Device Accessories

Similar items