We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent PVC angle globe valve with rising stem and knob handle

Hayward Flow Control

Hayward Flow Control AV10025T Globe Valve Angle 1/4" PVC/FPM Threaded Trap

SKU CH-TY7Y-NJFXC

Angle globe valve with 1/4" FNPT threads, PVC body and FPM seals rated to 150 psi and 140 °F

  • Product colorTransparent
  • Precise flow control with rising-stem globe design
  • Chemical-resistant PVC body with FPM seals handles aggressive fluids
  • 150 psi pressure rating for demanding plumbing systems
  • 140 °F maximum fluid temperature suits hot-water lines
  • Compact 1/4″ FNPT angle pattern fits tight installations

Valve for 1/4-inch piping

The Hayward Flow Control AV10025T globe valve handles fluid control in 1/4-inch FNPT threaded lines. Its PVC body and FPM seals suit chemical and water applications up to 140 degrees Fahrenheit. Installers needing a compact angle-pattern valve for corrosion-resistant service will find it appropriate.

Pressure rating and temperature limit

The valve withstands 150 psi fluid pressure at the rated temperature ceiling of 140 degrees Fahrenheit. Air and steam duties are not rated, so the design targets liquid media only. Rising-stem operation with a knob handle provides clear visual indication of the open or closed position.

Union bonnet and PVC construction

A union-style bonnet allows the valve internals to be serviced without cutting the pipework. All wetted parts, including the stem and wedge, are PVC for consistent chemical compatibility. The transparent body lets operators confirm flow status at a glance during routine checks.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $82.99
Pricier than about 73% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameHAYWARD FLOW CONTROL
Product colorTransparent

Questions about this item

How do I install the 1/4" FNPT angle globe valve without cross-threading the PVC threads?

Wrap PTFE tape clockwise on the male threads only, hand-tighten the valve into the fitting, then add one to two full turns with a strap wrench on the union bonnet — never on the transparent PVC body — to avoid cracking the stem or bonnet.

Which parts of the AV10025T will need replacement after extended service?

The PVC wedge and stem are the primary wear items; inspect the rising stem threads and wedge seating surface annually and replace either component if leakage appears at the bonnet union or the knob no longer seats fully.

At what fluid temperature does the 150 psi pressure rating of this PVC/FPM valve begin to drop?

The 150 psi rating applies up to the listed 140 °F maximum fluid temperature; above that temperature the PVC body and FPM seals lose strength and the valve must be derated or removed from service.

More in Drain Stoppers, Strainers & Traps

Similar items