We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark gray PVC bulkhead fitting with socket connections

HAYWARD POOL PRODUCTS INC

HAYWARD POOL PRODUCTS INC BFA1010SFS 1" Bulkhead Trap Socket x Socket

SKU CH-JBXC-3E8YX MPN BFA1010SFS

1-inch PVC bulkhead fitting with socket connections for tank installations up to 150 psi and 140°F

  • Product typeDrain Components
  • Product colorDark Gray
  • 1" socket connections for direct pipe fit
  • PVC body handles 150 psi working pressure
  • FPM gasket seals across 40 to 140 °F range
  • Fits tank walls up to 2.08 in thick
  • 1 7/8 in cut-out simplifies installation

1" Bulkhead Trap Socket x Socket

The Hayward BFA1010SFS is a PVC bulkhead tank fitting with a 1-inch pipe size and socket-to-socket connections. It installs through a 1 7/8 inch hole and supports walls up to 2.08 inches thick. The dark gray body uses an FPM gasket and handles pressures up to 150 psi.

Suits 1" socket plumbing.

This fitting suits installers joining two socket pipes through a tank wall within the 40 to 140 degrees F range. It will not work for threaded connections, pipes larger than 1 inch, or systems exceeding the 150 psi pressure limit.

1 7/8 inch required hole size

The 1 7/8 inch hole diameter is the critical dimension that decides fit. Drill the tank opening to this exact size so the socket x socket body seats correctly and the FPM gasket seals at up to 150 psi.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $31.99
Typical for this category: the median of 4,240 items is $31.99.

Specifications

Product
Brand nameHayward
Model nameBFA1010SFS
Product typeDrain Components
Product colorDark Gray

Questions about this item

What size hole must I already have drilled in the tank wall for this 1" bulkhead fitting?

The fitting requires a 1 7/8 in hole in the tank wall for proper installation.

Will the FPM gasket on this fitting handle the 140 °F upper limit of my existing plumbing loop?

Yes, the FPM gasket is rated for the full 40 °F to 140 °F temperature range of the fitting.

After threading the body through the wall, how do I confirm the 150 psi seal is holding?

Pressurise the system to its working pressure and inspect the socket joints and gasket face for any water seepage.

More in Drain Stoppers, Strainers & Traps

Similar items