HAYWARD POOL PRODUCTS INC BFA1012SES 1-1/4" Bulkhead Fitting Socket x Socket trap
1-1/4 inch PVC bulkhead fitting with socket-to-socket connections and EPDM gasket, rated to 150 psi at 70 degrees F and operating between 40 and 140 degrees F
- Product typeDrain Components
- Main materialHAWA
- Product colorGray
- 1-1/4" socket connections simplify tank installation
- EPDM gasket provides reliable sealing on curved or flat surfaces
- PVC construction handles 150 psi at 70°F operating pressure
- Rated for continuous use up to 140°F fluid temperature
- Suitable for systems down to 40°F minimum temperature
Bulkhead Fitting 1-1/4" Socket x Socket
The Hayward BFA1012SES is a PVC bulkhead tank fitting designed for 1-1/4 inch socket connections on both sides. It suits pool and spa plumbing installations where a watertight pass-through is required on curved or flat tank walls. The gray fitting uses an EPDM gasket and requires no bolt holes for mounting.
Pressure and Temperature Limits
This fitting is rated for a maximum operating pressure of 150 psi at 70 degrees Fahrenheit. It functions within a temperature range of 40 to 140 degrees Fahrenheit. Performance outside these limits is not supported by the manufacturer data, so the fitting should not be used in high-pressure or extreme-temperature systems.
Capacity and System Fit
The 1-1/4 inch socket size determines the flow capacity and pipe compatibility for this component. It comfortably handles standard pool circulation lines of that diameter but cannot accept larger or smaller pipe sizes without adapters. Builders needing different connection sizes or threaded ends must select an alternative fitting.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 59% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Hayward |
| Model name | BFA1012SES |
| Product type | Drain Components |
| Product color | Gray |
| Size & build | |
| Main material | HAWA |
Questions about this item
Is the 1-1/4 inch socket size on both ends the right choice for my plumbing run?
Yes, this fitting has a 1-1/4 inch socket connection on both the inside and outside, so it joins pipe of that exact size on either side of a tank wall.
What does the 150 psi rating at 70 degrees F mean for daily operation?
It is the maximum pressure the fitting can handle at that water temperature; at higher temperatures the allowable pressure drops.
How does the socket-by-socket interface affect the installation?
Both connections are solvent-weld sockets, so you glue pipe directly into each end without threading or adapters.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne
Cherne 270016 Pneumatic Test Ball Plug 1-1/4 to 1-1/2 in
- Drain Components
- HAWA
$23.99
0.00029254BTC
In stock
Power Drive
Power Drive C4016X7/8 Chain Coupling Sprocket 16T 7/8 in Bore
- Drain Components
$23.99
0.00029254BTC
In stock
