HETAI Digital Technology Co.,Ltd
HETAI Digital Technology Co.,Ltd eSATA USB Combo to SATA 22-pin cable 50cm
Connects 2.5 or 3.5 SATA drives to an eSATAp port with 5 V or 12 V power via 22-pin 7+15 connector on 50 cm cable
- Connection typeMicro USB to USB A
- Connect 2.5 or 3.5 inch SATA drives externally via eSATAp port
- Power 3.5 inch HDDs directly from 12 V eSATAp port contacts
- Run 2.5 inch HDDs from 5 V eSATAp port without extra adapter
- Full eSATA data transfer speeds over 50 cm cable length
- 22-pin combo connector handles both 7-pin data and 15-pin power
Connects SATA drives to eSATA USB combo ports
This cable links a 2.5 inch or 3.5 inch SATA hard drive to a notebook or PC equipped with an eSATA USB combo port. It carries both data and power through a single 50cm assembly. The 22-pin connector combines the 7-pin data and 15-pin power interfaces. No separate power supply is needed when the host port delivers 12 V.
Suits users with an eSATAp port needing external
It works for technicians recovering data from bare drives or anyone adding temporary storage through an eSATAp connection. The cable draws 5 V or 12 V directly from the port, so a 2.5 inch drive runs on 5 V while a 3.5 inch drive requires the 12 V supply. Not for systems that lack an eSATA USB combo port, or for drives that require a different interface.
22-pin SATA connector carries data
The single 22-pin plug merges the standard 7-pin data segment and the 15-pin power segment into one connection. This matches the drive's native interface exactly. The host side uses an eSATA USB combo male plug that fits the combined port. Cable length is 50cm.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Questions about this item
Does my laptop need a specific port for this cable to work?
Yes, the cable requires a free eSATAp combo port that supplies either 5 V or 12 V power.
Will the 12 V line power a 3.5-inch drive if I keep using an older desktop SATA drive?
The cable delivers 12 V from the eSATAp port, so a 3.5-inch SATA drive can run without an extra power supply.
How can I confirm the cable is transferring data at full eSATA speed after I connect a drive?
The drive should appear in the operating system and transfer files at the native eSATA rate supported by the host port.
More in USB Cords & Extension Cables
Similar items
Jansicotek PQ003 USB4 cable 5 ft 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to Mini DisplayPort adapter 4K 2K 60Hz
- USB Type C
- USB Type C
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable





