HETAI Digital Technology Co.,Ltd
HETAI Digital Technology Co.,Ltd USB Cable 4 Pin Molex Fan Computer Case Cord 4Pin Female
Powers a 4-pin Molex case fan from any USB port using a Micro-USB to USB-A adapter cable
- Connection typeMicro USB to USB A
- Powers 4-pin Molex fans from any USB port
- Micro USB to USB A connector fits standard sockets
- New condition ensures reliable operation from first use
- Simple adapter replaces internal power cables for clean builds
- Ideal for case fans needing 5 V USB supply
What this cable does
The HETAI USB cable provides a 5 V power path from a USB‑A port to a 4‑pin Molex fan header inside a computer case. It lets builders run case fans without occupying a motherboard fan header or a dedicated PSU connector.
Steady power delivery
Because the cable draws from the USB‑A port’s 5 V rail, the fan receives a constant voltage as long as the host system is powered. There is no boost or regulation circuitry, so fan speed stays proportional to the port’s current limit rather than spiking under load.
Replaces a Molex branch
This adapter replaces a traditional Molex Y‑splitter when the power supply lacks spare 4‑pin connectors or when the builder prefers a cleaner cable run. It is not suited for high‑current devices such as pumps or RGB controllers that exceed the USB port’s rated output.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Questions about this item
Will the USB-to-Molex cable generate noticeable heat or fan noise when powering a case fan continuously?
The adapter itself is passive and produces no noise; any heat or sound comes from the fan you connect, not from the cable.
What must I already have to use this Micro USB to 4-pin Molex adapter?
You need a standard USB-A power source (such as a PC port, wall charger or power bank) and a 4-pin Molex fan or device to plug into the female connector.
Can I run an older 4-pin Molex case fan from a modern USB-A port using this cable?
Yes — the cable delivers 5 V from any USB-A port to the Molex fan, so legacy fans spin without a traditional PSU connector.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ006 USB4 cable 1.5 ft 240W 40 Gbps Thunderbolt 3
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda DC 5.5mm x 2.1mm Female to Micro USB Male Power Cord 15cm 2Pcs
- USB ,DC
- 15 cm
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Vszerda UC-170-0.07M-XY Angled USB-C Male to Male Cable 7.5cm 65W USB2.0 Black
- USB Type C
- 7 cm





