Hetai Tech 3.0 OTG Cable Adapter Micro USB to USB A
Connects Micro USB devices to standard USB A peripherals at USB 3.0 speeds
- Connection typeMicro USB to USB A
- USB 3.0 speeds up file transfers with compatible devices
- Micro USB plug connects to phones and tablets with that port
- USB-A socket accepts flash drives, keyboards and mice
- OTG support lets mobile devices act as hosts for peripherals
- New condition means the adapter arrives unused and ready to use
Target devices
This OTG cable adapter connects Micro USB devices such as the Cube iWork 8 Ultimate, T6, T8, i7 Stylus, i10, i7 Remix and i6 Air 3G Dual OS to standard USB A peripherals. It is intended for users who need to attach flash drives, keyboards or other USB accessories to those specific tablets.
Build and connectors
The adapter uses a Micro USB plug on one end and a USB A receptacle on the other, enabling direct connection without extra dongles. Its compact form factor makes it easy to carry alongside the supported tablets for on-the-go expansion.
USB 3.0 support
The cable is rated for USB 3.0 speeds, which determines whether it can handle the bandwidth required by faster storage devices or peripherals. Buyers needing only USB 2.0 performance may find simpler alternatives, while those requiring higher throughput should verify their peripheral also supports USB 3.0.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Questions about this item
Does the USB 3.0 Micro USB connector support full USB 3.0 speeds?
The adapter uses a USB 3.0 Micro USB connector which provides up to 5 Gbps when both the host device and the connected USB A peripheral support USB 3.0.
What physical space is needed for the Micro USB plug on the device side?
The Micro USB plug requires a standard Micro USB 3.0 port opening; the compact adapter body adds minimal depth so it fits beside most neighbouring ports.
How is the OTG adapter installed and what step is often missed?
Plug the Micro USB end into the device, then connect the USB A peripheral; the step often missed is enabling OTG in the device settings before the peripheral is recognised.
More in USB Cords & Extension Cables
Similar items
Jansicotek PQ003 USB4 cable 5 ft 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to Mini DisplayPort adapter 4K 2K 60Hz
- USB Type C
- USB Type C
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable





