Hetai Tech Smart Chip Reader USB 2.0 1.5m cable black
Reads 5 V, 3 V and 1.8 V smart cards via USB 2.0 with a 1.5 m cable and ISO 7816, EMV and PIV support
- Product type8-in-1
- Reads bank, ID, SIM and CAC cards
- USB 2.0 interface at 480 Mbps speed
- 5 m cable gives flexible placement
- Works with Windows 98 through 10 and Linux
- Meets EMV 2000 Level 1 and ISO 7816 standards
Smart Chip Reader
The Hetai Tech Smart Chip Reader is a USB 2.0 card reader with a 1.5m cable designed for professionals who need to read financial, identification or SIM smart cards on a desktop or laptop. It supports ISO/IEC 7816 Class A, AB and C cards operating at 5V, 3V and 1.8V, and works with Windows 98 through Windows 10, Linux and Windows CE 5.0 without requiring external power.
Upgrade From Basic Readers
This device replaces single-slot readers that only handle one card voltage or lack EMV and PIV certification, making the jump worthwhile for users who process bank cards, CAC, DNIE or tax cards daily. It also adds a blue LED read indicator and broad driver support for middleware such as ActivClient, DKO and Pure Edge Viewer, which older generic readers often miss.
Capacity And Headroom
The reader handles 8-in-1 card types including ATM, IC, ID, SIM and smart cards at USB 2.0 speeds up to 480Mbps, which is sufficient for authentication, digital signing and online banking sessions. It is not suited for high-throughput bulk data transfer from memory cards or for environments that require USB 3.0 or newer host interfaces.
How it compares
Measured against everything we stock in USB & Internal Card Readers, at today’s prices. Recalculated every night.
- Price $18.99
- Typical for this category: the median of 511 items is $18.99.
Specifications
| Product | |
|---|---|
| Product type | 8-in-1 |
Questions about this item
What USB port does the 1.5 m cable plug into?
The reader connects to any USB 2.0 Type-A port and draws all power from that port, so no external adapter is needed.
How is the reader set up on Windows 10 and what step is often missed?
Plug the cable in, wait for the automatic USB-CCID driver to load, then insert a card; the blue LED confirms the chip is detected — skipping the wait is the common mistake.
Will the spring-loaded card slot or the 1.5 m cable need replacement first?
The slot is rated for roughly 10 000 insertions; the fixed 1.5 m cable cannot be swapped separately, so the whole unit is replaced when either wears out.
More in USB & Internal Card Readers
Similar items
STARTECH SDMSDRWU3AC USB-C & USB-A card reader 5 Gbps
- 1 x USB Type-C (24…
- External
Sabrent CRW-UINB 7-slot USB 2.0 internal card reader
- USB 2.0
- Internal
STARTECH 35FCREADBU3 3.5" USB 3.0 Card Reader
- USB 3.0 with UHS II
- Flash Reader





