Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Helium-sealed 6 TB enterprise drive spins at 7200 RPM with 128 MB cache and SATA 6.0 Gb/s interface
The HGST Ultrastar He8 HUH728060ALE600 is a 6TB 3.5-inch internal hard drive built for enterprise storage arrays and servers. It spins at 7200 RPM with a 128MB cache and uses a helium-sealed HelioSeal design to deliver high capacity with lower power draw per terabyte. The SATA 6.0Gb/s interface supports standard hot-swap bays and backplanes.
Verify that your system provides a free SATA 6.0Gb/s port and a standard 3.5-inch drive bay with 26.10mm height clearance. The bare-drive packaging means no screws, cables or mounting brackets are included. Confirm your RAID controller or host bus adapter supports 6TB drives and the 512e or 4Kn advanced format used by this model.
This drive upgrades from lower-capacity 7200 RPM enterprise SATA units where rack space and power budgets are tight. The helium platform cuts watts per terabyte, so the jump is worth it when you need more raw capacity in the same slot count. It is not suited for desktop workloads that demand low acoustic noise or consumer warranty terms.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HGST |
| Product line | Ultrastar He8 |
| Model name | HUH728060ALE600 (0F23269) |
| Total capacity | 6 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 8.5 ms |
| Mean write time | 9 ms |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 128 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.6 mm |
| Maximum length | 147 mm |
| Shipping weight | 1.36 kg |
| Package size | 150 × 102 × 25 mm |
The drive is supplied as a bare unit only; SATA data and power cables plus any 3.5" mounting hardware must be sourced separately.
Choose the 4Kn model for native 4 KB sector operation; select 512e only if the operating system or RAID controller requires 512-byte emulation.
The 7200 RPM platters and 128 MB cache deliver sequential reads and writes near the SATA 6.0 Gb/s ceiling, with average seek of 8.5 ms and latency of 4.16 ms.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?