Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Enterprise 3.5″ SAS 12Gb/s hard drive with 2TB capacity, 7200 RPM speed and 128MB cache for high-performance storage arrays
The HGST Ultrastar 7K6000 0F22798 is a 2TB 3.5-inch internal hard drive built for enterprise workloads. It runs at 7200 RPM with a 128MB cache and connects via a SAS 12Gb/s interface. This bare drive targets data centres, cloud storage clusters and surveillance arrays that demand sustained throughput and proven reliability.
Compared to the prior 7K4000 generation this series delivers 50% more capacity per drive and 30% better power efficiency in watts per terabyte. Random write performance improves up to three times using media cache technology while sequential read and write speeds rise by 25%. The jump is worth it when density and efficiency gains outweigh the cost of a controller refresh.
Installation requires a compatible SAS 12Gb/s host bus adapter or RAID controller; the drive will not operate on a standard SATA-only motherboard port. The 26.1mm height fits standard 3.5-inch bays but verify chassis clearance for the 147mm length. Common issues include missing SAS cables, unsupported firmware on older controllers and confusion with the SATA variant of the same series.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HGST |
| Product line | Ultrastar 7K6000 |
| Model name | HUS726020AL4210 (0F22798) |
| Total capacity | 2 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 7.6 ms |
| Mean write time | 8 ms |
| Mean latency | 4.16 ms |
| Storage | |
| Flash memory type | Hard Drive |
| Cache memory | 128 MB |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.6(+/-0.25)mm |
| Maximum length | 147 mm |
| Shipping weight | 0.91 kg |
| Package size | 229 × 152 × 76 mm |
Yes, the 26.1 mm height and 101.6 mm width match the standard 3.5-inch form factor, so it fits any compliant bay or tray.
No, SAS 12Gb/s requires a SAS HBA or RAID controller; the drive also supports 6Gb/s SATA but only when attached to a SAS backplane or controller.
MTBF is a population statistic, not a service interval; monitor SMART attributes and replace the drive if reallocated sectors or pending sectors appear.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?