Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8TB helium-filled 3.5-inch SAS drive with 7200 RPM, 128MB cache and 12Gb/s interface for high-density server storage
The HGST Ultrastar He8 HUH728080AL4204 is an 8TB 3.5-inch internal hard drive built on a second-generation helium platform. It spins at 7200 RPM with a 128MB cache and connects through a SAS 12Gb/s interface. The bare drive targets enterprise and data-centre environments where capacity density and power efficiency are paramount.
This drive fits servers, cloud and hyperscale storage, and distributed file systems such as Ceph and Hadoop that demand high capacity per slot and low watts per terabyte. It is not intended for consumer desktops or workstations that lack SAS controllers or 12Gb/s backplanes, nor for builds needing SATA-only connectivity without an adapter.
The helium design delivers 33% more capacity than 6TB air drives while cutting idle power by 23% and improving power efficiency by 44% in watts per terabyte. Average seek time is 8.5ms and average latency 4.16ms, supporting sustained throughput in scale-out deployments. Workloads requiring higher IOPS or sub-millisecond latency will exceed what this mechanical drive can provide.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HGST |
| Product line | Ultrastar He8 |
| Model name | HUH728080AL4204 (0F23654) |
| Total capacity | 8 TB |
| Recommended use | Ideal for Servers |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 8.5 ms |
| Mean write time | 9 ms |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 128 MB |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.6(+/-0.25)mm |
| Maximum length | 147 mm |
Yes, the HUH728080AL4204 uses a 12Gb/s SAS interface and must connect to a SAS controller or backplane; it will not operate on a SATA-only port.
It fits the same 3.5-inch, 26.1mm-high bay and uses the SAS 12Gb/s interface, so it can share an array, though rebuild times will reflect the 8TB capacity and 8.5ms seek time.
Run the drive manufacturer's diagnostic utility or check SMART attributes; they will report the 128MB cache size and show latency figures consistent with the 4.16ms specification.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?