HOFFMAN A16106CH NEMA 12/13 16x10x6 Wall Mount Electrical Box
Wall-mount carbon-steel enclosure rated NEMA 12, 13 and IP65, 16.0 in high, 10.0 in wide, 6.0 in deep, with hinged solid cover, screw-down clamps and neoprene gasket
- Product typeElectrical Boxes
- NEMA 12 and 13 rating protects against dust and water ingress
- Carbon steel body with ANSI 61 polyester powder finish resists corrosion
- Hinged solid cover with screw-down clamps ensures secure sealing
- IP65 rating confirms protection from jets and dust
- Weld nuts allow direct panel and terminal mounting inside
NEMA 12/13 Rated Wall Mount Enclosure
This Hoffman A16106CH enclosure provides a NEMA 12 and 13 rated wall mount solution for indoor electrical components. The carbon steel body carries a gray ANSI 61 polyester powder finish. It includes a neoprene gasket and screwdown clamps on a hinged solid cover. The unit meets IP65, CSA, cUL, IEC and UL listed standards.
Upgrade From Open or Lower Rated Boxes
The jump is worth it when moving from unrated or NEMA 1 enclosures that lack dust, oil and non-corrosive liquid protection. The 14/16 gauge steel and welded weld nuts add rigidity for panel mounting. The screwdown clamps replace simple latches for a tighter seal. The 16.0 in height by 10.0 in width by 6.0 in depth interior gains the 32FR83 panel.
Fits Standard Wall Mount Builds
The box mounts directly to flat surfaces using the welded weld nuts provided. The hinged cover swings clear for wiring access while the clamps secure it shut. The solid cover prevents accidental contact with live parts inside. The carbon steel construction handles typical industrial environments without additional shielding. The depth accommodates terminal blocks and smaller control devices.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $185.99
- Pricier than about 86% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Hoffman |
| Product type | Electrical Boxes |
Questions about this item
What wall-mount hardware fits the 16.0 in H x 10.0 in W enclosure?
The box includes weld nuts for a mounting panel and terminals; use the panel 32FR83 to secure it to the wall.
How do I install the hinged cover and avoid a gasket leak?
Align the neoprene gasket evenly, close the hinged cover, then tighten the screwdown clamps in a cross pattern to seat the seal.
When should I replace the neoprene gasket on this NEMA 12/13 box?
Inspect the gasket annually; replace it if it shows cracking, compression set, or if the IP65 seal no longer holds water spray.
More in Electrical Enclosures & Cabinets
Similar items
HOFFMAN A1412CH Electrical Enclosure 14 in H 6 in D
- Electrical Enclosur…
HOFFMAN ASE24X18X6 NEMA 1 24x18x6 in Wall Mount Enclosure
- Electrical Boxes &…





