HOFFMAN A201610LP 20x16x10 in carbon-steel enclosure
Wall-mount carbon-steel enclosure rated NEMA 12/13 and IP65 with hinged cover, screw-down clamps and padlock hasp
- Product typeElectrical Enclosures, Wireways & Covers
- NEMA 12 and 13 rating protects against dust and water ingress
- IP65 certification confirms resistance to jets and dust
- 14/16 gauge carbon steel with powder coat finish resists corrosion
- Hinged cover with screw-down clamps and padlock hasp secures contents
- Wall-mount design with mounting holes and interior panel 32FT31 simplifies installation
20x16x10 Carbon Steel Enclosure
This carbon steel enclosure measures 20 inches high, 16 inches wide and 10 inches deep. It carries NEMA 12 and 13 ratings plus an IP65 rating for indoor protection against dust, dirt and non-corrosive liquids. A hinged solid cover secures with screw-down clamps and a padlocking hasp. The body is finished in grey powder coat and includes a neoprene gasket and mounting holes.
Wall-mount projects needing lockable access
Installers who need a wall-mounted box with a hinged door that can be padlocked will find the clamp-and-hasp arrangement suitable. The enclosure is not rated for outdoor UV exposure or for hazardous locations requiring NEMA 4X or 7 classifications. Buyers who need a transparent cover or a larger interior panel should consider other options.
NEMA 12 and 13 with IP65 rating
The combined NEMA 12, 13 and IP65 ratings confirm the enclosure is designed for indoor industrial environments where dripping water, circulating dust and oil or coolant seepage are present. This rating set is the primary specification that determines whether the box meets the installation’s environmental requirements.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $516.99
- Pricier than about 90% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | NVENT HOFFMAN |
| Product type | Electrical Enclosures, Wireways & Covers |
Questions about this item
What wall-mounting hole pattern does the 20x16x10 in carbon-steel enclosure use?
The enclosure includes pre-drilled mounting holes on the back for direct wall attachment; use the supplied hardware to secure it to a flat surface.
How do the screw-down clamps and padlocking hasp secure the hinged cover, and what step is often missed?
Tighten each clamp by hand until the neoprene gasket compresses evenly, then insert a padlock through the hasp; skipping the even compression step can leave a gap that defeats the IP65 seal.
When should the neoprene gasket on the 14/16 ga enclosure be inspected or replaced?
Check the gasket annually or after any impact; replace it if you see cracks, permanent compression set, or if the IP65 rating is compromised.
More in Electrical Enclosures & Cabinets
Similar items
Eaton DH361FRK Fusible Safety Switch 30 A 600 V 3PST NEMA 3R
- Industrial Electric…
Wiegmann N412202008WC electrical box 20 in H 8 in D
- Electrical Enclosur…
TRENDnet TI-CA4K IP68 Outdoor Electrical Box 350W
- Switches
- • Supports up to 16…





