We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray powder-coated carbon steel wall-mount enclosure with hinged cover, screw-down clamps and padlocking hasp

HOFFMAN

HOFFMAN A242412LP electrical box with screw-down clamps and padlocking hasp

SKU CH-B9VP-CY0F4

Wall-mount carbon-steel enclosure with hinged cover, screw-down clamps and padlocking hasp, rated NEMA 12/13 and IP65

  • Product typeElectrical Enclosures, Wireways & Covers
  • NEMA 12 and 13 rated for industrial dust and oil protection
  • IP65 certified against water jets and solid particles
  • 14/16 gauge carbon steel with powder-coated gray finish
  • Hinged cover with screw-down clamps and padlocking hasp
  • 24 in height and depth with included mounting holes

Industrial electrical enclosure for protected

The Hoffman A242412LP is a carbon-steel enclosure rated NEMA 12 and 13 with an IP65 rating. It suits installers who need a solid, powder-coated gray cabinet for indoor environments where dust, dripping water or oil are present. The hinged cover uses screw-down clamps and a padlocking hasp for secure access. A neoprene gasket maintains the seal around the 24-inch height and depth.

Passive thermal management with sealed construction

No fans or active cooling are fitted; heat dissipates through the 14/16 gauge steel walls and the 12-inch depth. The solid cover and gasket prevent airflow, so internal temperature rise depends entirely on the installed equipment and ambient conditions. Noise is limited to the mechanical sound of the clamps during opening or closing. Power draw is zero unless devices inside the enclosure consume it.

Mounting hardware and interior panel ready

The box arrives with pre-drilled mounting holes for direct wall attachment. An interior panel designated 32FT44 is specified for the enclosure, providing a mounting surface for DIN rails, terminal blocks or control gear. The padlocking hasp allows authorised-only access without extra parts. No additional accessories or software are bundled beyond the enclosure, clamps, gasket and hasp.

How it compares

Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.

Price $613.99
Pricier than about 90% of the 1,411 comparable items (median $39.99).

Specifications

Product
Brand nameNVENT HOFFMAN
Product typeElectrical Enclosures, Wireways & Covers

Questions about this item

How do I mount the A242412LP enclosure and what step is often missed?

Use the pre-drilled mounting holes on the back of the carbon steel body to secure it to the wall; the step often missed is verifying the neoprene gasket is seated evenly before tightening the screw-down clamps to maintain the IP65 and NEMA 12, 13 seal.

What maintenance will the enclosure need over time?

Inspect the neoprene gasket periodically for compression set or cracking and replace it if the seal degrades; also check the powder-coated gray finish for scratches that could expose the carbon steel to corrosion.

What limit appears first during continuous outdoor exposure?

The powder-coated carbon steel finish and neoprene gasket will degrade under sustained UV and weather cycling before the 14/16 ga steel structure fails, reducing the IP65 and NEMA 12, 13 protection.

More in Electrical Enclosures & Cabinets

Similar items