HOFFMAN ASE6X6X4NK electrical box, 6 in H, 4 in D
A wall-mount carbon-steel enclosure with screw-on cover, IP30 and NEMA 1 rated, 6 in height, 4 in depth
- Product typeElectrical Enclosures, Wireways & Covers
- NEMA Type 1 enclosure rated for indoor use
- IP30 rating protects against solid object ingress
- Carbon steel construction with powder-coated finish
- Captive screw latches secure the cover quickly
- cUL listed to UL 50 and CSA C22.2 No 40 standards
Indoor Steel Enclosure
The Hoffman ASE6X6X4NK is a carbon-steel electrical enclosure rated NEMA Type 1 and IP30 for indoor use. It measures 6 inches high by 6 inches wide by 4 inches deep with a powder-coated gray finish. The solid cover attaches with captive screws and includes a screw-latch feature. Mounting holes allow direct wall installation.
Installers needing a listed junction box
This enclosure suits electricians and panel builders who need a cUL-listed box meeting UL 50, 50E and IEC 60529 for general indoor wiring. It is not suited for outdoor exposure, wash-down areas or applications requiring NEMA 3R, 4, 4X or 12 ratings. Buyers who need transparent covers, hinge mechanisms or larger internal volume should look elsewhere.
NEMA Type 1 and IP30 rating
The single specification that decides fit is the NEMA Type 1 and IP30 rating, which limits use to dry indoor locations only. The box carries cUL listing per CSA C22.2 No 40 and UL file E27525. If the installation demands a higher environmental rating, this enclosure will not comply.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 68% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | NVENT HOFFMAN |
| Product type | Electrical Enclosures, Wireways & Covers |
Questions about this item
How much heat does the carbon-steel enclosure dissipate when it is running continuously?
The carbon-steel body with powder-coated finish acts as a passive heat sink; internal temperature rise depends on the installed components rather than the enclosure itself.
What mounting hardware must I already have to secure this wall-mount box?
The enclosure includes pre-drilled mounting holes; you supply the lag bolts, anchors or screws suited to your wall material.
Will my existing 12-gauge wiring fit through the knockouts on this 6-inch-deep box?
The box is rated for 12, 14 and 16 ga conductors, so standard 12-gauge cable passes through the knockouts without issue.
More in Electrical Enclosures & Cabinets
Similar items
Hubbell Incorporated HBLMCAPY Single Pole Connector Cover Male Yellow
- Wiring Devices
Bryant BRY5369NCSY 5-20R 20A 125V AC electrical box
- Straight Blade Devi…
- 0.245 in to 0.655 in
Killark FS-1M Weatherproof Electrical Box 18 cu in Gray
- Electrical Boxes &…





