HOFFMAN ASG10X10X4NK Electrical Box 10 in 4 in
A wall-mount carbon-steel electrical enclosure measuring 10 by 10 by 4 inches with a screw-on solid cover, galvanized finish and captive screw latches, rated NEMA Type 1 and IP30
- Product typeElectrical Enclosures, Wireways & Covers
- NEMA 1 rating protects indoor wiring
- IP30 rating shields against solid objects
- Galvanized steel resists corrosion
- Captive screw cover secures quickly
- Wall-mount holes simplify installation
Enclosure dimensions and rating
This carbon-steel electrical enclosure measures 10 inches high, 10 inches wide and 4 inches deep with a NEMA Type 1 and IP30 rating. It provides indoor protection against falling dirt and non-corrosive liquids for general-purpose wiring.
Gauge range and mounting
The box uses 12, 14 or 16 gauge steel and includes mounting holes for wall installation. The solid screw-on cover with captive screw latches secures the interior while allowing straightforward access during maintenance.
Standards compliance
The enclosure is cUL listed per CSA C22.2 No 40 and UL 50, 50E listed with file number E27525, and meets IEC 60529 requirements. These certifications confirm suitability for standard indoor electrical installations.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $31.99
- Cheaper than about 58% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | NVENT HOFFMAN |
| Product type | Electrical Enclosures, Wireways & Covers |
Questions about this item
Will the 10-inch height and 4-inch depth fit beside my existing NEMA 1 enclosures?
Yes, the 10-inch height and 4-inch depth match standard NEMA Type 1 dimensions, so it aligns with other A90P1 series boxes on the same wall.
How can I confirm the IP30 rating is met after installation?
Verify the solid cover sits flush, all captive screws are fully seated, and no cable entries breach the gasket surface.
Does the box include mounting hardware or must I buy screws separately?
The enclosure has pre-drilled mounting holes; mounting screws and anchors are not supplied and must be purchased separately.
More in Electrical Enclosures & Cabinets
Similar items
Bryant BRY8300RTR 20 A 125V AC 5-20R duplex receptacle
- Wiring Devices
Hubbell Incorporated HBL400MBN Series 16 Male Connector 2/0 to 4/0
- Single Pole Devices
- 2/0 to 4/0





