We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray carbon steel wall enclosure 24x24x10 inches hinged cover quarter-turn latch

HOFFMAN

HOFFMAN CSD242410 NEMA 4 12 13 Wall Electrical Box 24x24x10

SKU CH-MSFB-T3FT8

Wall-mount carbon-steel enclosure rated NEMA 4, 12, 13 and IP66, 24 in high by 24 in wide by 10 in deep with hinged solid cover and quarter-turn latches

  • Product typeElectrical Boxes & Enclosures
  • NEMA 4, 12, 13 ratings protect against dust, water and oil ingress
  • IP66 rating ensures reliable sealing for harsh industrial environments
  • Carbon steel construction with ANSI 61 polyester powder finish resists corrosion
  • 1/4-turn latch with screwdriver slot allows quick, secure access to interior
  • Wall-mount design with included grounding hardware simplifies installation

NEMA 4 12 13 Wall Electrical Box

The Hoffman CSD242410 is a carbon steel enclosure rated for NEMA 4, 12 and 13 with an IP66 rating. It measures 24.0 inches high by 24.0 inches wide by 10.0 inches deep. A hinged solid cover secures with quarter-turn latches and a polyurethane gasket. The ANSI 61 grey polyester powder finish protects the 14/16/18 gauge steel construction. It includes grounding hardware and sealing washers for wall mounting.

Upgrade from open or lower-rated enclosures

This unit replaces boxes that lack protection against water ingress, dust or oil. The jump is worth it when the installation demands a NEMA 4 or IP66 seal in wet or dirty environments. It also suits applications requiring CSA, cUL, IEC and UL listed compliance. Buyers needing a smaller footprint or a non-metallic body should look elsewhere.

Hinged cover with quarter-turn latches

The hinged door swings open for interior access and closes with a screwdriver-slot latch. Mount the box to the wall using the integrated mounting points and install the included interior panel 32FK22. Ensure the polyurethane gasket seats fully and tighten latches evenly to maintain the seal. Misaligned gaskets or over-torqued latches are the most common installation errors.

How it compares

Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.

Price $545.99
Pricier than about 90% of the 1,411 comparable items (median $39.99).

Specifications

Product
Brand nameNVENT HOFFMAN
Product typeElectrical Boxes & Enclosures

Questions about this item

What wall-mount clearance does the 24.0 in H x 24.0 in W x 10.0 in D carbon-steel enclosure need?

The box measures 24.0 inches high, 24.0 inches wide and 10.0 inches deep, so allow at least that footprint plus latch swing room on the mounting surface.

How is the 1/4-turn latch with screwdriver slot secured, and what step is often missed?

Turn the latch a quarter-turn with a screwdriver until it seats against the polyurethane gasket; the common miss is leaving the latch partially rotated so the seal does not compress.

When should the polyurethane gasket and the ANSI 61 polyester powder finish be inspected or replaced?

Check the gasket for compression set and the gray powder coat for chips or corrosion at each scheduled enclosure opening; replace either if sealing integrity or NEMA 4/12/13 rating is compromised.

More in Electrical Enclosures & Cabinets

Similar items